Duban DB20-SRT231 Sand blasting shot peening Surface Roughness Tester brochure

Related products

DUBAN DB20-LX-F sponge Hardness Gauge
4 position 10 mm LCD0~100 HF10~90 HF

¥2288.0
SE
DUBAN DB25-204TM-20Nm Handheld Torque Gauge with three-jaw chuck 3mm-16mm as standard
±2kgf.m/±2000gf.m/±20N.m/±4.4Lbf.m0.001kgf/1gf/0.01N/0.001Lbf3mm-16mm

¥3432.0
SE
DUBAN DB22-TM240T6 Multimode Ultrasonic Thickness Gauge
Two Operating Modes of thickness measurement, single point mode and scan modeLCD with backlightPulse echo mode: 0.65mm-600mm (steel); echo mode: 3mm~ 60mm

¥4290.0
SE
DUBAN DB20-LX-T5 Spinning & weaving Hardness Gauge
Hardness/Average/MAX MaximumSpherical 5mm φThe curved end of the probe is used for bobbins with a diameter of less than or equal to 400mm, and the flat end of the probe is suitable for bobbins with a diameter greater than 400mm

¥2574.0
SE
DB25-207FM-100N Integrated Force Gauge Electronic Force Gauge
±10kgf;±10000gf;±98N;±22Lbf0.001kgf;0.01N;0.01LbfLevel 0.2

¥2145.0
SE
DB30-6226N Precision Ordinary Sound Level Meter, Precision Sound Level Meter Level 2
20Hz-8kHzΦ12.7mm (1/2 ") test condenser microphoneA Weighting, C Weighting, Lin (linear)

¥1300.0
SE
DUBAN DB30-6226F Noise Spectrum Analyzer Measurement range 25dB~ 130dB
φ 12.7mm (1/2 ") test condenser microphone10Hz~20kHzA Weighting, C Weighting, Lin (linear)

¥3380.0
SE
DUBAN DB22-HM450 Leeb Hardness Tester
LCD backlight liquid crystal displayRelative error +/- 0.8% (HLD = 800), Repeatability +/- 0.8%200~900 HLD

¥2431.0
SE
DUBAN DB10-2000 Wet Film Comb WFT gauge 25~ 2032µm
polygon25~2032µmGB/T1764-79、GB/T134522-92、ISO2808-74

¥200.0
SE
DUBAN DB22-TM275P Transmittance meter protective film, PC, acrylic and other light transmitance measurement
0.0%-100.0%% beam of light transmission<30mm

¥2860.0
SE

Recommended for more brochure