Japan

Japan OSP L250 Spreader handle, with OSP L250 series Applicator rod

SE
Use with OSP rod Spreader with a rod length of 250mm
$97.00/set
PromotionLoading...
Coupon

OSP OSP L250 Handle handleSPEC

OSP OSP L250 Handle handleDetails

OSP OSP L250 Handle handlePacking list

SKU
NB000442
Adaptive rod
Length 250mmOSP coating rod
Handle material
Aluminum alloy + chrome plating on the surface
Fixture material
stainless steel
Screw material
stainless steel
Precautions
Can not be directly soaked in corrosion solvent cleaning
OSP L250 Handle
handle
Use with OSP rod Spreader with a rod length of 250mm
Japan OSP L250 Spreader handle, with OSP L250 series Applicator rod Picture

OSP coating rods

The OSP Coating Stick Handle can be used for OSP 250cm length coating rods, which are currently only available in 250cm. There is no 400cm.

When purchasing, customers should pay attention to the matching of the handle and the coating width.

OSP color scraper compared to traditional wire bars

The traditional wire rod coater is coated by winding a thin steel wire on the surface of the steel rod, and the thin steel wire on the surface is easy to loosen and break, and it is not easy to clean, and it cannot be coated with ultra-thin films.

Deficiencies of traditional color scraping sticks:

★ The steel wire is easy to loosen and break 

★ Not easy to clean 

★ Ultra-thin film coating is not possible

Is there a product that can replace the wire scraper?

After several improvements, OSP finally succeeded in developing the D-BAR. It was officially launched into the market in 2001.

Advantages of OSP Scratch Stick:

In order to solve the above problems, OSP has developed a new extruded wire rod color scraper. OSP wire rod color scraping rod is the use of precision mold, the use of cold extrusion processing technology on the surface of the steel rod to process the concave and convex wavy curve, the same coating effect as the traditional wire rod scraping color bar. However, because there is no thin steel wire wound on its surface, there is no worry about the steel wire loosening and breaking. Moreover, the curved lubrication of the surface is smooth, making it very easy to clean. The most commendable thing is that the OSP wire rod color scraping rod breaks through the limit of the traditional wire rod color scraping rod, and can coat the wet film with a thickness of only 2um, which solves the problem of ultra-thin film coating in one fell swoop. OSP wire rod model encyclopedia

 

★ There is no worry about the wire being loose and broken 

★ Very easy to clean 

★ Ultra-thin film coating is possible

It won't come loose, it won't break

The principle of plastic deformation of metal is used to roll various mountain shapes on the surface of the steel rod.

It has unimaginable performance of Steel Wire Drawdown Rod

It can solve various problems in coating processing

A combination of left and right spiral directions

Prevent the mixing of air bubbles and reduce the loss of substrate caused by air bubble mixing.

Square eye lines

Mainly used in calendering rollers

It can solve various problems in coating processing

OSP coating rod size

【Note】The product picture is for reference only, please refer to the actual product for the appearance of the corresponding OSP wire bar applicator

Precautions

The handles have an oxide and electroplating layer and cannot be directly soaked in corrosive solvents for cleaning

FAQ
QWhat kind of screws does this wire rod need to be used with?
A M4*6
QIs the handle used to fix the wire rod? Is it rotated or fixed when scraping?
A Hello, the two ends of the handle are fixed with screws. In laboratory tests, it can be rotated if the screws are not tightened, but the stability is insufficient. The uniformity of the film will be affected, and it is recommended to fix it. The function of the handle lies in the force of the two ends of the equilibrate wire rod, and the actual hand scraping is also fixed. Thank you for your inquiry!
QCan this matching handle be used universally?
A Hello, this handle is suitable for all models of OSP with a length of 250mm, but not for a length of 400mm or a Miscellaneous brand wire rod.