MODERNER SZQ-500 (ISO Bird-type) Wet Film Applicator 500μm film Applicator

SZQ-500 (ISO Bird-type)

Film Applicator

Wet film thickness 500μm, Spreader width 100mm, accuracy +/- 10μm, with high hardness and abrasion resistance, high temperature, low temperature dimensional stability.

Overview of SZQ-500 Wet Film Coater

SZQ-500 wet Film Applicator is a MODERNER ISO stainless steel single-sided wet Film Applicator. The film thickness prepared by wet Film Applicator SZQ-500 is 500 microns, the precision is ±10 microns, and the effective coating width is 100mm. The groove number of SZQ-500 wet Film Applicator is 1.

Materials used

SZQ-500 (ISO bird type) wet Film Applicator is made of 9Cr18Mo high carbon chromium stainless steel, 9Cr18 is high carbon chromium martensitic stainless bearing steel. It has high hardness and wear resistance, high temperature and low temperature dimensional stability.

Hardness value

The hardness value of SZQ wet Film Applicator is HRC48±2.

Operating procedures

First, place the sample on the platform and fix the sample to ensure that the Wet Film Applicator does not move when it slides over.

Second, according to the required wet film thickness requirements, select a Wet Film Applicator of the corresponding specification, and place it on the short side of the template, close to parallel or at a specified position.

Thirdly, pour about 5 ml of the sample in front of the Wet Film Applicator, press both ends of it with your fingers, and slide at a constant speed of 150 mm/s to finally obtain a wet film with the required thickness.

fourth,SZQ-500 (ISO bird type) wet Film Applicator is cleaned and dried with a suitable solvent after use, and the surface is coated with oil or vaseline.

Pictures

Packing list：Applicator x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.