MODERNER SZQ-800 (ISO Bird-type) Coating applicator 800 μm Moulding

SZQ-800 (ISO Bird-type)

Film Applicator

Wet film thickness 800μm, Spreader width 100mm, accuracy +/- 10μm, high carbon chromium stainless steel material, widely used in Coating inks industry, Moulding uniform, high mass.

Overview of SZQ-800 paint applicator

The SZQ-800 paint applicator is a MODERNER ISO bird-type paint applicator, which uses a high-carbon chrome stainless steel paint applicator. The coating thickness of the SZQ-800 is 800 microns, and the coating film accuracy is ±10 microns. Coating applicators are widely used in the coating and ink industry, with uniform film production and high quality.

Materials used

SZQ-800 (ISO bird type) paint applicator is made of 9Cr18Mo high-carbon chromium stainless steel, and 9Cr18 is high-carbon chromium martensitic stainless bearing steel. It has high hardness and wear resistance, high temperature and low temperature dimensional stability.

Hardness value

The hardness value of SZQ paint applicator is HRC48±2.

Operating procedures

First, place the sample on the platform and fix the sample to ensure that the Wet Film Applicator does not move when it slides over.

Second, according to the required wet film thickness requirements, select a Wet Film Applicator of the corresponding specification, and place it on the short side of the template, close to parallel or at a specified position.

Thirdly, pour about 5 ml of the sample in front of the Wet Film Applicator, press both ends of it with your fingers, and slide at a constant speed of 150 mm/s to finally obtain a wet film with the required thickness.

Fourth, the SZQ-800 (ISO bird type) paint applicator is cleaned and dried with a suitable solvent after use, and the surface is coated with oil or petroleum jelly.

Pictures

Packing list：Applicator x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.