CHINA DGG-9240A Desktop Forced Air Drying Oven heater Drying Oven 200 ℃/225L

DGG-9240A

Desktop Forced Air Drying Oven

Working temperature 5~ 30 ℃, Relative Humidity ≤ 80%, altitude ≤ 2000m, power supply AC220V +/- 10% 50Hz +/- 1Hz, control range room temperature + 10 ℃~ 200 ℃, Temperature resolution 0.1 ℃, Temperature Fluctuation +/- 0.5 ℃, size internal 600 * 500 * 750.

Features

1. Horizontal constant-temperature Forced Air Drying Oven for small experiments is horizontal, back-heated, and horizontal forced convection to ensure uniform temperature in the studio.

2. The temperature control system uses high-performance CPU processing chips and high-sensitivity, high-precision platinum resistance sensors to make temperature control more efficient and operation more convenient.

3. The horizontal constant temperature Forced Air Drying Oven for small experiments has sensor failure alarm, over-temperature alarm, self-diagnosis dynamic control, temperature display correction, parameter memory and timing functions up to 9999 minutes.

4. The optional independent temperature limit control system automatically interrupts work when the temperature exceeds a certain temperature. (optional)

Series model

Precautions for use:

1. Please check the electrical performance of this box before powering on, and pay attention to whether there is an open circuit or leakage.

2. When everything is ready, you can put the test sample in, close the door and unscrew the exhaust valve on the top. At this time, you can connect the power supply and start working.

3. Do not remove the side door at will, disturb or change the circuit. Only when the box fails, you can remove the side door and check the circuit one by one.

4. This box is a non-explosion-proof drying box, so it contains flammable and volatile items. Do not put them in the drying box to avoid accidents.

Packing list：machine X1, manual X1, certificate X1, warranty card X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.