MODERNER Frame 30/60/90/120 Large Frame 4-sided Applicator 80mm Groove Width

Frame 30/60/90/120 (groove width 80mm)

Large Frame Applicator

Large frame type 4-sided, Film thickness 30/60/90/120μm, Spreader width 80mm, stainless steel material.

Introduction of frame type four-sided Applicator

MODERNER frame type 30/60/90/120 large frame type four-sided Applicator is a four-side Wet Film Applicator suitable for coating film proofing in the coating, ink, paint and other industries. The frame type 30/60/90/120 coating film The thickness is 30/60/90/120 microns and the width is 80mm.

Parameter comparison

Steps for usage

1. Put the template on the platform and fix it so that the Frame Applicator does not move when it slides over.

2. Select the preparation of the appropriate wet film thickness, and place it on the short side of the sample, close to parallel or at a specified position.

3. Pour about 5 ml of sample on the front of the frame type 30/60/90/120 large frame type four-sided Applicator.

4. Press both ends of the Applicator with your fingers, and slide at a constant speed of 150 mm/s to finally obtain a wet film with the required wet film thickness.

4. After use, the frame type 30/60/90/120 large frame type four-sided Applicator should be wiped clean with a suitable solvent, and the surface should be coated with oil or Vaseline.

Advantages

Frame type 30/60/90/120 large frame type four-sided Applicator is suitable for coating wet film with specific thickness, suitable for coating, ink, color paint and other industries.

Pictures

Packing list：Applicator x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.