CHINA NBC-Z150C Electromagnetic vibration table Touch screen vibration Tester

With up and down vibration direction, using PLC touch screen control, the screen directly displays Linear dispersion diagram, Frequency waveform changes can be viewed at any time, Frequency can be displayed to 0.1HZ, precision 0.1HZ, test Platform size is 1500 * 1500mm.

$3337.00/set

PromotionLoading...

Coupon

Model：

NBC-Z150C

Factory

Contact

Details SPEC Con VIDEO CAT

Factory NBC-Z150C Electrodynamic Shaker (Touch Screen)SPEC

Factory NBC-Z150C Electrodynamic Shaker (Touch Screen)Details

Factory NBC-Z150C Electrodynamic Shaker (Touch Screen)Packing list

SKU: NB044641

Test direction: up and down

Maximum test Weight: 0-60kg

Platform size: 1500*1500mm

Control mode: PLC touch screen type (Linear dispersion diagram is displayed directly on the screen)

Frequency adjustment range: 1-600HZ

Precision: Frequency can be displayed to 0.1HZ, precision 0.1HZ

Amplitude: 0~5Mm (random type)

vibration waveform: sine wave

Maximum Acceleration: 10G

function: Sweep frequency, fixed frequency, time control

Frequency doubling function (0.01Hz): 8 segments multiply increase ① low to high frequency ② high to low frequency ③ low to high and then to low frequency/recyclable

Logarithmic function (0.01Hz): ① down to the upper frequency ② up to the lower frequency ③ down to the upper frequency and then to the lower frequency --3 modes logarithmic/recyclable

Power: AC220V 50HZ

NBC-Z150C

Electrodynamic Shaker (Touch Screen)

Introduction

Electromagnetic vibration tables are widely used in national defense, aviation, communications, electronics, automobiles, home appliances, and other industries. This type of equipment is used to detect early faults, simulate actual Operating Conditions for assessment and structural strength testing. The product has a wide range of applications, wide applicability, and effective and reliable test results. Sine wave, frequency modulation, time control.

Features

Adopt professional and simple operating technology and fixed frequency working method
Built-in amplitude prediction routine and easy amplitude modulation
With time timing and countdown display functions
Four points are synchronously excited, and the table vibrates evenly
Control parameters are displayed synchronously in real time without manual intervention.
Stepless adjustment of amplitude, fixed frequency and frequency sweep operation functions adapt to various test requirements of different industries.
Add an anti-interference circuit to solve the problem of interference to the control circuit due to strong electromagnetic fields
The base of the machine adopts a vibration isolation device, which is easy to install and runs smoothly. There is no need to install anchor fixing screws.

FAQ

QOur factory needs to do vibration testing of electronic products. Do you have any recommended instruments?

A It is recommended that you use the NBC-Z150C electromagnetic Shaker Table, which adopts Touchscreen control, is easy to operate, supports fixed frequency and sweep frequency testing, can effectively simulate the vibration environment in transportation or use, and helps to find the early failure of electronic products.

QWe need to do time-controlled vibration experiments. Is this instrument sufficient?

A Yes! NBC-Z150C has accurate time timing and inverted Timing function, supports sweep frequency, fixed frequency and other modes, and can also perform 8-segment frequency doubling and 3 logarithmic cycle tests to meet your vibration experimental needs of different long and long modes.

QOur factory needs to do electronic product vibration testing, which is mainly used to find early failures. Do you have any recommendations?

A NBC-Z150C electromagnetic Shaker Table adopts sine wave vibration, which can effectively simulate actual working conditions and help find early faults of electronic products. Four-point synchronous vibration ensures uniform vibration of the table and more reliable test results.

QIs this Shaker Table suitable for automotive parts testing?

A Yes, NBC-Z150C is suitable for automotive parts testing. It supports frequency sweep and fixed frequency functions. Frequency range 1~ 600Hz, can simulate the vibration environment under different road conditions, and help assess the structural strength and durability of parts.

QIs Shaker Table complicated to operate? We want to choose a simple and practical one.

A It is not complicated. The NBC-Z150C adopts PLC touch screen control, and the parameters are displayed in real time without manual intervention. It supports functions such as fixed frequency and time control. The operation is professional and simple, and it is suitable for daily testing in factories.

Standard

Filter Brand Store Contact