IPRE RA150 asperity Profile Gauge resolution 0.02μm

RA150

Asperity Profile Gauge

The integrated design can simultaneously perform asperity, waviness, and profile measurement without replacing the probe. The high-precision grating measurement system and high-precision Inductance measurement system are selected, and the measurement accuracy is high.

Features

• The integrated design can measure roughness, waviness and contour at the same time without changing the probe;

• Use high-precision grating measurement system and high-precision inductance measurement system to achieve high measurement accuracy;

• The linear motion guide rail displacement data collection adopts precision linear grating, which has high positioning accuracy and good stability;

• The measurement workbench can be adjusted in the Y direction, horizontal direction, horizontal sector direction and various angle adjustments, which greatly facilitates user measurement needs.

Application scope

This equipment can measure various parameters such as line and cross-sectional profile parameters, surface waviness parameters, roughness parameters, etc. of various mechanical parts. It can measure the straightness, inclination, angle processing, circle processing (distance from straight line to tangent line, distance from center of circle to center of circle, distance from intersection point of arc radius to center of circle, distance from center of circle to straight line), point and line processing (intersection point) of various parts Shape parameters such as the distance from the straight line, the distance from the intersection to the center of the circle, the intersection of two straight lines, the distance between the intersection and the intersection), logarithmic curve, groove width, groove depth, groove edge distance, groove center distance, inclination, horizontal distance, vertical distance, etc.

Standard configuration

Packing list：

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.