United States

RDS 70 #3/8 "paints WFT 160.0μm Length 400mm

SE
Large RDS scraper, Film thickness of 160μm, steel Wire diameter 1.78mm, non-popular rod number, suitable for low viscosity thick film Spreader, both ends have 50mm hand-held part, stainless steel material.
$161.00/piece
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con VIDEO CAT OI
Similar products

RDS 70# 3/8" Applicator rod 3/8 "SPEC

RDS 70# 3/8" Applicator rod 3/8 "Details

RDS 70# 3/8" Applicator rod 3/8 "Packing list

SKU
NB000045
Production process
wire-wound
WFT
160μm
diameter
9.52mm
Total length
400mm
application width
300mm
Grip Width
50+50mm
material
stainless steel
Wire diameter
1.78mm
70# 3/8"
Applicator rod 3/8 "
Large RDS scraper, Film thickness of 160μm, steel Wire diameter 1.78mm, non-popular rod number, suitable for low viscosity thick film Spreader, both ends have 50mm hand-held part, stainless steel material.
RDS 70 #3/8 "paints WFT 160.0μm Length 400mm Picture

RDS coating Rods Figure 1

RDS coating Rods Figure 2

RDS coating Rods Figure 3

RDS coating Rods Figure 4

RDS coating Rods Figure 5

RDS coating Rods Figure 6

RDS coating Rods Figure 7

RDS coating Rods Figure 8

RDS coating Rods Figure 9

RDS coating Rods Figure 10



FAQ
QDo you support customization? Such as wet film thickness and length?
A Spreader rod length and main rod diameter support customization, but wet film thickness RDS has provided dozens of specifications covering more than 200 microns, and in principle does not accept customization.
QI want to do a test on the GB/T13217.7 standard. Is this Applicator rod okay?
A Sure
QCan the RDS70 wire rod be used to apply Gloss oil?
A Hello, RDS wire rod is widely used in Gloss oil industry. Whether to use RDS8 wire rod needs to be calculated according to the wet film thickness you want to apply. Please refer to the wet film thickness calculator on the page.
QSpreader need to estimate the film thickness?
A Hello! Different models of manual Spreader scrapers have corresponding wet film thicknesses. As long as you choose the manual Spreader scraper according to the required wet film thickness, if you are not sure about the required wet film thickness, you can refer to the following wet film thickness calculator. Thank you for your consultation!
Knowledge
Standard
Filter Brand Store Contact