PUSHEN AFA-III Vacuum Spreader
SEVacuumpump power 150W, Drawdown Vacuum Plate dimensions 360x250mm, pore diameter 1mm, hole spacing 18mm, using the principle of vacuum adsorption, the substrate adsorption and then vacuum Spreader stage for Moulding.
Model：
AFA-III
Pushen AFA-III Vacuum SpreaderSPEC
Pushen AFA-III Vacuum SpreaderDetails
Pushen AFA-III Vacuum SpreaderPacking list
- SKU
- NB045148
- aperture
- 1mm
- hole spacing
- 18mm
- Number of holes
- 176mm
- Vacuum pump Voltage
- 220V
- Vacuum Pump Power
- 150W
AFA-III
Vacuum Spreader
Vacuumpump power 150W, Drawdown Vacuum Plate dimensions 360x250mm, pore diameter 1mm, hole spacing 18mm, using the principle of vacuum adsorption, the substrate adsorption and then vacuum Spreader stage for Moulding.
Introduction
Using the principle of vacuum adsorption, the substrate is normally adsorbed and then molded on the vacuum coating table.
FAQ
QVacuum Spreader What material is the Spreader plate?
A
aluminum alloy
QWhat is the aperture of that Spreader table? What kind of trachea do I need?
A
The aperture is 1mm, and the outer diameter of the trachea is 6mm.
QSpreader can be placed in the oven heating 100 ℃ coating?
A
Yes, the plate will not be deformed.
QWhat material is this countertop made of? How high temperature can it withstand?
A
Aluminum plate material, can withstand 150 ℃
Standard