PUSHEN PVC vinyl sheet, black plastic sheet coating stain resistance test

PVC

PVC vinyl film

Gloss (60 °) < 10 (measured value: 6 +/- 0.5), reflectance < 4% (measured value: 3 +/- 0.5) can replace the asbestos-free cement pressure plate used in the determination of architectural coatings scrub resistance, smooth matte surface, no plasticizer.

Introduction

Black plastic sheet (PVC material) is the test substrate specified in GB/T 9780-2013 "Test Method for Stain Resistance of Architectural Coatings" and GB/T 9755-2014 "Synthetic Resin Emulsion Exterior Wall Coatings".

It can replace the asbestos-free cement pressure board used in the wash resistance test of architectural coatings. It has a smooth matte surface and does not contain plasticizers. In the scrub test, the coating is applied to the scrub test piece with a specific thickness, and after drying, it is scrubbed with the PS 2730JTX-II Architectural Coating Scrub Resistance Instrument.

As a supplier to the Standardization Committee, Pushen strictly controls the quality of each batch of production to ensure the repeatability and comparability of test data. As a supplier to the Standardization Committee, Pushen strictly controls the quality of each batch of production to ensure the repeatability and comparability of test data.

Standards compliant

Packing list：100 pieces of PVC vinyl film X1 (box)

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.