CHINA NBC-6025FB pilot production hot-melt adhesive coater film aluminum foil film equipment

NBC-6025FB

Pilot production type hot-melt adhesive coater

The maximum Spreader width is 1000mm, the Spreader speed is adjustable from 1-10m/min, the rewinding width is 100cm, the forward and reverse stepless speed change, and the infinite length Spreader is automatically rewound when glued.

Introduction

The production hot melt adhesive coating machine is a device used to coat hot melt adhesive on the surface of different materials. This type of machine is typically used in industrial production environments where hot melt adhesive needs to be applied evenly to the surface of a product for bonding, sealing or coating purposes.

The maximum coating width of the pilot production hot melt adhesive coating machine is 1000mm. The two Teflon baffles in the glue tank can easily adjust the coating width to suit different needs. The machine supports unlimited length of coating and gluing, and has an automatic rewinding function, which greatly improves production efficiency. The forward and reverse stepless speed change function makes the operation more flexible, and the coating speed can be adjusted in a wide range, from 1 to 10m/min. The adjustable knob on the unwind reel allows you to change the tension to suit different materials, while the take-up reel uses mechanical tension control to ensure stability during pickup.

Features

• The maximum coating width is 1000mm. The hiking width is adjusted with two Teflon baffles in the rubber tank. Can apply glue to unlimited length and automatically rewind;

• Forward and reverse continuously variable speed;

• Recommended coating speed: 1-10m/min adjustable;

• The unwinding reel can adjust the knob to change the tension of the unwinding reel;

• The rewinding reel can be adjusted with mechanical tension control;

• The heating rod, upper rubber wheel and rubber tank can be quickly disassembled and separated from the machine body to remove residual glue.

Packing list：

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.