Italy

HANNA HI98193 dissolved oxygen DO-biochemical oxygen demand BOD Tester

SE
Large range, dissolved oxygen 50.00 mg/L (ppm), saturated dissolved oxygen 600.0%, measurement of dissolved oxygen, saturated dissolved oxygen, atmospheric pressure, temperature A number of important water index measurement dissolved oxygen can be directly converted BOD, OUR, SOUR measurement results.
$1188.00/set
PromotionLoading...
Coupon
Model:

HANNA HI98193 Dissolved Oxygen MeterSPEC

HANNA HI98193 Dissolved Oxygen MeterDetails

HANNA HI98193 Dissolved Oxygen MeterPacking list

SKU
NB045255
Dissolved oxygen Measurement Range
0.00-50 mg/L (ppm); 0.0-600% saturation
Resolution of dissolved oxygen
0.01Mg/L (ppm); 0.1% saturation
Dissolved oxygen calibrate
Automatically at one or both points of 100% (8.26mg/L) and 0% (0mg/L); manually, using the value entered by the user in% saturation or mg/L
Atmospheric pressure Measurement Range
450-850mmHg
atmospheric pressure resolution
1mmHg
Atmospheric pressure calibrated
A point in any range of pressure values
Temperature Measurement Range
-20.0-120.0℃;-4.0-248.0°F
temperature resolution
0.1℃;0.1°F
Temperature Accuracy (@25 ℃/77 ° F)
+/- 0.2 ℃; +/- 0.4 ° F (excluding probe errors)
Temperature calibrated
The temperature value of one or two points in any range
Measurement mode
Direct DO; BOD (Biochemical Oxygen Demand); OUR (Oxygen Absorption); SOUR (Specific Oxygen Uptake)
Air pressure compensation
Automatic from 450-850mmHg
Salinity compensation
Automatic, from 0-70g/L
Temperature compensation
Automatic from 0.0-50 ℃ (32.0-122 ° F)
Probe
HI764073 Polarographic DO probe with protective sleeve internal temperature transducer, DIN Connector and 4m (13 ') cable (included)
logging
Log up to 400 samples on demand
PC connection
Optical isolation USB (with HI92000 software)
Battery type/lifespan
1.5V (4) AA battery/no backlight for about 200 hours of continuous use (about 50 hours with backlight)
Automatic shutdown
User can choose: 5, 10, 30, 60 minutes or disable
Environment
0-50℃(32-122°F);RH 100% IP67
size
185x93x35.2mm(7.3x3.6x1.4")
Weight
400g(14.2 oz.)
HI98193
Dissolved Oxygen Meter
Large range, dissolved oxygen 50.00 mg/L (ppm), saturated dissolved oxygen 600.0%, measurement of dissolved oxygen, saturated dissolved oxygen, atmospheric pressure, temperature A number of important water index measurement dissolved oxygen can be directly converted BOD, OUR, SOUR measurement results.
HANNA HI98193 dissolved oxygen DO-biochemical oxygen demand BOD Tester Picture

Introduction

The HI98193 is a portable DO meter with extended range up to 50 ppm and 600% saturation. The HI98193 features pressure, temperature and salinity compensation, which is critical for accurate dissolved oxygen readings. HI98193 is equipped with HI764073 polarographic dissolved oxygen probe with field-replaceable PTFE membrane cap.

Biochemical oxygen demand (BOD, biochemical oxygen consumption)

The amount of dissolved oxygen consumed by microbial metabolism is an important indicator to indirectly express the degree of water body pollution by organic matter. It is defined as: the amount of free oxygen consumed by aerobic microorganisms to oxidize and decompose organic matter per unit volume of water under aerobic conditions. , the unit is expressed in ppm (mg/L). The higher the value, the more organic pollutants in the water and the more serious the pollution.

The international standard is to measure biochemical oxygen demand by cultivating for 5 days in an Incubator set at 20℃, which is the five-day biochemical oxygen demand (BOD5).

Oxygen consumption rate (OUR, oxygen uptake rate)

Oxygen consumption rate determines the oxygen consumption rate of activated sludge to analyze whether it contains non-toxic substances, load conditions and sludge balance to better set up and control the sewage treatment process.

Specific oxygen consumption rate (SOUR)

It is a quantitative index for evaluating the stability of activated sludge in sewage treatment. It refers to the oxygen consumption per unit mass of activated sludge in unit time; SOUR is an important biochemical index in experimental studies such as microbial culture. The SOUR (respiratory intensity) of microbial cells refers to the amount of oxygen consumed by cells per unit weight in unit time.

Characteristics

  • IP67 waterproof, sturdy shell;

  • Salinity compensation allows direct determination of dissolved oxygen in salt water;

  • Automatic temperature compensation, capable of one or two-point temperature calibration;

  • Automatic air pressure compensation, 1-point calibration;

  • Built-in calculations, determination of biochemical oxygen demand (BOD), oxygen uptake (OUR) and specific oxygen uptake (SOUR);

  • The probe automatically polarizes when started;

  • Approximately 200 hours of continuous use;

  • Clear display, dot matrix display, with multi-function virtual keys;

  • AutoHold, automatically holds the first stable reading on the display;

  • Calibration timeout, which triggers an alarm when calibrating at a specified interval;

  • PC connection via optically isolated micro USB with HI92000 software;

  • Log in on demand and store measurement data at the push of a button;

  • GLP data provides calibration data including date, time, pressure, calibration value, temperature and salinity values ​​of last calibration.

FAQ
QIs there any portable instrument for measuring dissolved oxygen in wastewater treatment?
A HANNA HI98193 dissolved oxygen meter supports automatic temperature, salinity and pressure compensation, can directly in the sewage environment accurate measurement of dissolved oxygen, and built-in BOD, OUR, SOUR calculation function, is very suitable for sewage treatment on-site rapid detection.
QDo BOD five-day biochemical oxygen demand experiment, which one should I choose?
A HI98193 dissolved oxygen meter, it has a built-in BOD Measurement mode, which can automatically record and calculate the oxygen consumption in five days. With the high-precision of the polarographic probe, it can directly meet the experimental requirements of BOD5 standard, and the operation is portable and the data is reliable.
QNeed to measure the oxygen consumption rate of activated sludge, how to choose the function?
A Select HI98193 because it is specially designed with OUR and SOUR Measurement mode, which can automatically calculate oxygen consumption per unit time, suitable for evaluating sludge activity and treatment efficiency, fast probe Response and Automatic calibration to ensure the accuracy of field testing.
Standard