United States

RDS 28 #1/4 "inks scraper rod film thickness 64.0μm rod diameter 6.35mm

SE
Using formed molding technology, rod diameter is 6.35mm, can film 64.0μm, with continuous wire, easy to clean and other characteristics, using 304 stainless steel material.
$155.00/piece
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con VIDEO CAT OI
Similar products

RDS 28# 1/4“ Applicator rod 1/4 "SPEC

RDS 28# 1/4“ Applicator rod 1/4 "Details

RDS 28# 1/4“ Applicator rod 1/4 "Packing list

SKU
NB004559
Production process
formed
WFT
64.0μm
diameter
6.35mm
Total length
400mm
application width
300mm
Grip Width
50+50mm
material
stainless steel
28# 1/4“
Applicator rod 1/4 "
Using formed molding technology, rod diameter is 6.35mm, can film 64.0μm, with continuous wire, easy to clean and other characteristics, using 304 stainless steel material.
RDS 28 #1/4 "inks scraper rod film thickness 64.0μm rod diameter 6.35mm Picture

Product description

The RDS28 wire Bar Coater can coat a film with a wet film thickness of 64.0 microns, and the No. 28 coating rod is a popular model used in the industry. Key industries include: resin, pigment paste, additives, architectural coatings, powder coatings, printing, chemical engineering, aluminum profiles, etc. RDS wire Bar Coater has been used in CHINA for 30 years and is well received by industry users.


RDS coating Rods Figure 1



RDS coating Rods Figure 2



RDS coating Rods Figure 3



RDS coating Rods Figure 4



RDS coating Rods Figure 5



RDS coating Rods Figure 6



RDS coating Rods Figure 7



RDS coating Rods Figure 8



RDS coating Rods Figure 9



RDS coating Rods Figure 10



FAQ
QExcuse me, the larger the number, the larger the ink? What number do you use for plastic Printing ink?
A The larger the number, the greater the wet film thickness. The thickness of the specific inks scraped sample depends on your test purpose. It is recommended to follow the standard.
QDoes this different inch coating bar have any effect? What is the difference?
A It's just a habit of use, it doesn't matter.
QDo you support customization? Such as wet film thickness and length?
A Spreader rod length and main rod diameter support customization, but wet film thickness RDS has provided dozens of specifications covering more than 200 microns, and in principle does not accept customization.
QDoes the RDS extrusion rod meet the ASTMD823 standard?
A The 28 #1/4 "extrusion rod can be referred to.
QGravure printing Printing ink, the substrate is BOPP or PET, which type of wire rod should be used for these films?
A Which type of rod to choose is based on the requirements of the wet film or thickness of dry film you need to prepare. It is recommended to convert according to the wet film thickness calculator developed by NBchao.
Knowledge
Standard
Filter Brand Store Contact