HANNA HI96821 sodium chloride refractive analyzer (fresh water sample)

HI96821

Sodium chloride refractive analyzer

(G/100g) Measurement range 0 to 28, (g/100mL) Measurement range 0 to 34, specific gravity (S.G.) Measurement range 1.000 to 1.216, can display 4 different reference units, stainless steel sample chamber, easy to clean and anti-corrosion.

Introduction

HI96821 refractometer measures the refractive index of a liquid solution sample and converts it into the sodium chloride content of the sample. It is specially used for the food industry and is not suitable for seawater salinity measurement.

The refractive index measurement is very simple and fast. The user only needs to calibrate the refractometer with distilled or deionized water and then add two drops of the sample to be measured into the sample chamber. The sodium chloride measurement value of the sample to be measured can be obtained within a few seconds. . The instrument automatically performs temperature compensation, and the measurement results are accurate and reliable. Samples are measured after simple user calibration using deionized or distilled water. The instrument measures the refractive index of the solution within seconds, performs the necessary calculations, and displays the results in selected units. Digital refractometers eliminate the uncertainties associated with mechanical refractometers, allowing portable measurements where needed.

The instrument adopts internationally recognized reference unit conversion and temperature compensation methods and can display NaCI concentration in 4 different reference units: g/100g, g/100 mL, specific gravity and °Baumé (degrees of Baume). The second line of the LCD screen can simultaneously display the measured temperature, low battery prompt icon and other help information.

Characteristics

• Two-line LCD display with temperature reading below the measured value.

• ATC, automatic temperature compensation.

• BEPS, low battery reminder, ensures accurate and effective readings.

• IP65 waterproof, suitable for laboratory and field measurements.

• Fast and accurate measurement, measurement results are quickly displayed in 1.5 seconds.

• One-point calibration, use distilled or deionized water.

• For micro-volume samples, only 2 drops of sample are needed.

• Automatically shuts down if not used for three minutes.

• Stainless steel sample chamber, easy to clean and anti-corrosion.

• Easy to operate, just drop the sample and press the button to read, simple and fast.

• ABS heat shrink plastic carrying case.

Packing list：machine X1, manual X1, certificate X1, warranty card X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.