China

CHINA FS-1.5 High Speed Disperser Inverter Brushless Motor, Hand Lift 1500w

SE
Motor Power 1500W, Maximum Rotation speed 3000r/min, Dispersion Disk φ 120mm, Maximum Processing capacity 40L, Stable, High Efficiency and Reliable.
$500.00/set
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con

YaKu FS-1.5 Disperser (frequency conversion brushless)SPEC

YaKu FS-1.5 Disperser (frequency conversion brushless)Details

YaKu FS-1.5 Disperser (frequency conversion brushless)Packing list

SKU
NB045720
Motor type
asynchronous motor
Motor Power
1500W/220V [Optional 380v]
Speed regulation mode
Frequency control with Rotation speed display
Rotation speed
3000R/min [Optional 1500/1000]
Lifting method
Hand lift
Overall height
95cm
dispersion rod
φ 20mm, length 400mm, 304 stainless steel material
dispersion disk
Phi 120mm, 304 stainless steel material
Machine size
500×560×990mm
Ground size of dispersion plate
Minimum 50mm, maximum 480mm
Total Weight
30kg
FS-1.5
Disperser (frequency conversion brushless)
Motor Power 1500W, Maximum Rotation speed 3000r/min, Dispersion Disk φ 120mm, Maximum Processing capacity 40L, Stable, High Efficiency and Reliable.
CHINA FS-1.5 High Speed Disperser Inverter Brushless Motor, Hand Lift 1500w Picture

Introduction

The FS-1.5 Experimental High Speed Disperser has a power of 1500w and a Dispersing disc diameter of 120mm, which can be used to stir and disperse various samples. The device supports frequency conversion speed regulation, allowing users to flexibly control the stirring speed according to experimental needs. The servo brushless motor drive system ensures stable, efficient and reliable operation. In addition, the Experimental High Speed Disperser can run continuously for many hours to meet the requirements of long-term experiments.

Features

  1. Disperser is equipped with variable frequency speed regulation function, which can adjust the stirring speed. By flexibly adjusting the stirring speed, it can meet different Sample types and process requirements to ensure precise control of the stirring effect.

  2. Servo brushless motors are characterized by high efficiency, reliability, and low noise, providing stable stirring power and long service life.

  3. The use of 304 stainless steel dispersion discs with a diameter of 120mm provides good corrosion resistance and high temperature resistance, making it suitable for contact with various chemical substances and easy to clean and maintain.

  4. Disperser supports long-term continuous operation. Suitable for laboratory or industrial applications that require long-term operation, ensuring a continuous, stable mixing and dispersing process.

  5. The dispersion disc can be disassembled and replaced, making it easy to choose the appropriate dispersion disc according to different experimental or process requirements to achieve the mixing and dispersion requirements of different samples.


FAQ
QI want to do a Coating Disperser experiment, what type of Disperser should I choose?
A YaKu FS-1.5 Disperser is recommended. Its 1500W Power and 120mm dispersion disc can efficiently handle Coating raw materials; frequency conversion speed regulation can precisely control the dispersion speed to ensure uniform and delicate Coating; 304 stainless steel material corrosion resistance, suitable for Coating chemicals.
QThe laboratory needs to continuously disperse samples for a long time. Is this machine up to the task?
A Yes. FS-1.5 uses a servo brushless motor, which operates stably and with low noise, and supports continuous operation for many hours; Rotation speed of up to 3000 rpm can meet various scattered needs, and is suitable for laboratory applications that require long-term stable operation.
QIs this Disperser convenient for handling samples of different viscosities?
A Convenient. It supports variable frequency speed regulation, and you can flexibly adjust the Rotation speed according to the viscosity of the sample; the dispersion disc can be disassembled and replaced, and different sizes of dispersion discs can be selected, whether it is a low viscosity solution or a high viscosity slurry, it can be easily handled.
QThe laboratory needs to process 40 liters of samples. Which Disperser is suitable?
A FS-1.5 Processing capacity of up to 40 liters is just right for your needs. Its 1500W motor provides enough power, and the dispersion disc can be removed and replaced for easy adaptation to different samples. The hand lift and frequency conversion speed regulation make the operation flexible and ensure that the large-capacity samples are evenly dispersed.
QI need a low-noise, durable Disperser. Do you have any recommendations?
A YaKu FS-1.5 adopts servo brushless motor, which runs low noise, efficient and reliable, and has a long life. 304 stainless steel dispersion disc is resistant to corrosion and easy to clean, suitable for long-term use. Frequency conversion speed regulation and continuous operation function ensure stable performance.
QThe laboratory needs to process Coating samples within 40 liters. Which Disperser is recommended?
A YaKu FS-1.5 Disperser is recommended, with a maximum Processing capacity of 40 liters. Power 1500W and 120mm dispersion disc can efficiently complete Coating dispersion. The frequency conversion speed regulation can precisely control the Rotation speed to adapt to different viscosity Coatings. The stainless steel material is resistant to corrosion and easy to clean. It is suitable for laboratory Coating research and development and small batch production.
QDo chemical experiments require a long time to stir, what durable Disperser?
A YaKu FS-1.5 adopts servo brushless motor, which runs stably and with low noise, and supports continuous operation for many hours. 304 stainless steel dispersion disc is resistant to corrosion and high temperature, suitable for chemical Sample Handling. The hand lift adjustment is convenient, which can ensure a continuous and stable dispersion effect during the experiment.
QNeed to replace the dispersion disc experimental equipment, what is recommended?
A YaKu FS-1.5 is recommended. Its dispersion disc can be removed and replaced. You can choose the appropriate size dispersion disc according to the characteristics of the sample. The φ 120mm standard disc is suitable for most experiments. For finer dispersion, Miscellaneous specifications can also be selected, which is flexible and practical.
Standard
Filter Brand Store Contact