China

Chengyue CY-SPC8-A Spinning Coater acrylic cavity 10000 rpm, touch screen

SE
Speed range 0~10000rpm, Acceleration 100~5000rpm/s, transparent acrylic cavity design, 7-inch touch screen is easy to operate, and Linear dispersion can be preset.
$2403.00/set
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con CAT

ChengYue CY-SPC8-A Spin CoaterSPEC

ChengYue CY-SPC8-A Spin CoaterDetails

ChengYue CY-SPC8-A Spin CoaterPacking list

SKU
NB045918
Speed range
0~10000rpm
Acceleration range
100~5000rpm/s
Rotation speed resolution
1rpm
single step time
3000s
substrate size
Diameter ≤ 8 inches (200mm)
Cavity material
Transparent acrylic
Operation mode
7 inch high definition LCD touch screen
Epoxy method
Manual glue drop, optional precision syringe pump
Linear dispersion
Linear dispersion 5 segments each, a total of 5 Linear dispersions can be stored
Extraction port
φ 8mm quick screw interface
Machine size
290×365×260mm
Machine Weight
12kg
Vacuum pump
Dry mechanical pump
pumping rate
50L/min
Power supply Voltage
AC220V 50/60Hz
CY-SPC8-A
Spin Coater
Speed range 0~10000rpm, Acceleration 100~5000rpm/s, transparent acrylic cavity design, 7-inch touch screen is easy to operate, and Linear dispersion can be preset.
Chengyue CY-SPC8-A Spinning Coater acrylic cavity 10000 rpm, touch screen Picture

Introduction

CY-SPC8-A Spin Coater has been miniaturized and adopts aluminum alloy structure as a whole.Acrylic cavity, beautiful and solid appearance. The instrument adopts advanced precision motors, turningThe speed can reach 10,000 rpm, which effectively guarantees the uniformity of film formation. In addition to thisThe instrument is controlled by touch screen, which can preset the homogenization curve, which greatly simplifies the useThe process reduces the learning cost and is very suitable for laboratory purchase.

Scope of application

The Spin Coater can coat liquid or colloidal materials on silicon wafers, crystals, quartz, ceramics and other substrates to form thin films, which is mainly usedIn the fields of photoresist spin coating, biological culture medium production, sol-gel method to produce polymer films, etc.


FAQ
QWhat materials can the homogenizer be used on?
A CY-SPC8-A is suitable for silicon, crystal, quartz and ceramic substrates with a maximum diameter of 8 inches. It is commonly used in photoresist spin coatings, bio-foster base fabrication and polymer film preparation because it precisely controls Rotation speed and Acceleration to ensure film mass.
QI need an instrument that can store homogenizing procedures. Any recommendations?
A The CY-SPC8-A spin coater comes with 5 uniform glue Linear dispersions, each with 5 parameters, which can be easily set and invoked through the 7-inch touch screen. This function simplifies sexual repeability experiments and improves efficiency. It is especially suitable for laboratories that require standardized processes.
Knowledge
Standard
Filter Brand Store Contact