MODERNER Frame type 50/100/150/200 Large frame type 4-sided Applicator film width 80mm

Frame type 50/100/150/200 (groove width 80mm)

Large Frame Applicator

Wet film thickness 50/100/150/200μm, Spreader width 80mm, size 80 * 100mm, good abrasion resistance.

Introduction to the four-sided Applicator

MODERNER frame type 50/100/150/200 Large frame type four-sided Applicator has a coating film thickness of 50/100/150/200 microns and a coating width of 80mm. It is a Wet Film Applicator made of stainless steel and has good wear resistance . The hardness of the frame four-sided Applicator is HRC48±2.

Parameter comparison

material use

The frame type 50/100/150/200 large frame type four-sided Applicator is made of 9Cr18Mo stainless steel, which has the characteristics of wear resistance and corrosion resistance.

Pictures

Steps

1. Put the template on the platform and fix it so that the Frame Applicator does not move when it slides over.

2. Select the preparation of the appropriate wet film thickness, and place it on the short side of the sample, close to parallel or at a specified position.

3. Pour about 5 ml of the sample in front of the frame-type 50/100/150/200 large frame-type four-sided Applicator, press the two ends of the Applicator with your fingers, slide at a constant speed of 150 mm/s, and finally get the wet film at the desired wet film thickness.

4. After use, the frame type 50/100/150/200 large frame type four-sided Applicator should be cleaned with a suitable solvent, and the surface should be coated with oil or Vaseline.

Packing list：Applicator x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.