Back

TASI TASI-650 CO Tester Specifications

Search
TASI TASI-650 CO Tester detects carbon monoxide concentration or source

Brand:TASI

Model:TASI-650

Name:CO Tester

DetailsContact
Specifications
Measurement range 0~1000ppm
sensor calibration Factory calibration at 205ppm
sensor Electrochemistry
Initial Accuracy +/- 5% read value +/- 5ppm
reaction time 90% read value in 70 seconds
operating temperature 32 to 105 ° F
Operating Relative Humidity 15 to 90% R.H., non-condensing environment
Long term drift Less than 5% per year (depending on usage)
Battery life 200 hours
show 3 ½ digit LCD display, maximum 1999 readings
Low battery Voltage display When the battery Voltage is lower than the operating Voltage, "+ -" is displayed
Operating environment 0 ℃~ 50 ℃, Relative Humidity < 70% R.H.
Storage environment -20 °C ~ 60 °C, 0bit80% R.H.
Accuracy test environment 23 ℃ +/- 5 ℃, Relative Humidity < 75% R.H.
size 189mm(高)x65.5mm(
Weight Approximately 200 grams (including batteries)
Standard Accessories Manual, battery
Packing list
host x1, manual x1, battery x1, leather case x1, certificate x1.
After-sales instructions

Warranty days: 365 days

【Attention】

The purchase of this product is calculated from the date of receipt by the customer, and the warranty period is 1 year.

The warranty scope is limited to the host, the accessories are not warranted, and the problem needs to be sent back to the manufacturer to define whether it is within the scope of the warranty.

Freight sharing limit during the warranty period: the sender pays.

Damage caused by improper use is not covered by the warranty.

[Note] For after-sales services outside the Chinese mainland, if the instrument requires repair, the shipping and possible associated taxes shall be borne by the sender. Generation address of the manual: http://en.nbchao.com/p/462/Specification.html , which is only used by users who purchase commodities from the NBCHAO.