Digital tensIon Meter, Haibao HG-2 Newton push-pull machine 2N/0.001N

HG-2

Force Gauge (Digital Display)

Measured value 2N, 0.2kg, 0.44lb, load Graduation 0.001N, 0.1kg, 0.0001lb, Sensors structure Sensors built-in, error of indication 0.5%, power supply NiMH battery 6V/1500mAh, unit Kgf, N, Lbf.

Introduction

Hypertherm HG-2 digital tension gauge is a portable digital tension gauge with a maximum load value of 2N and a load division value of 0.001N. The HG-2 digital tensile gauge adopts a segmented LCD display with a green backlight function, which is convenient for use in environments with insufficient light. HG-2 digital display force gauge supports three units of N, kgf, and lbf, which can be freely interchanged.

Product Structure

The structure of the HG-2 digital tensile gauge includes: upper limit indicator light, lower limit indicator light, buttons, display window, contact connecting rod, communication interface, power adapter jack, and level signal output interface. The details are as follows:

Specification size chart

Features

1. HG-2 digital tensile gauge has the characteristics of high accuracy, high resolution and high stability.

2. Freely set the upper and lower limit comparison values, and can automatically sound alarm and level signal output.

3. Test direction display (pull force +, thrust force -).

4. Adopt segmented LCD display and green backlight screen.

5. HG-2 digital tensile gauge can store 99 sets of test data and automatically calculate the average, maximum and minimum values ​​of the stored data.

Introduction to display parameters

1) Test value reading area

2) Numerical units, you can choose from three different measurement units: "N", "kgf", and "lbf". When using an external large range, there will also be "kN".

3) Battery power indicator. When the battery power is very low, charge it in time. When the battery power is empty, the HG-2 digital tensile gauge will automatically shut down.

4) Memory number where data is stored

5) Data average indication: "Average" means displaying the average value

6) Working mode indication

"Track": weight tracking mode;

"Peak": peak hold mode;

7) Peak hold lock symbol

This symbol will be displayed if a peak is being held in peak hold mode.

8) Push and pull force direction symbols

"+" is displayed during the pull test and "-" is displayed during the push test.

Introduction

Certificate

Packing list：Force Gauge x1, Certificate of Conformity x1, Warranty Card x1, Manual x1, Instrument Case x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.