PUSHEN PS 2931/2 tinplate 120 * 50 * 0.28mm 500pcs/bag
SESpecification parameters 120 * 50 * 0.28mm, rounded corners non-porous, in line with standard GB/T 2520, surface preparation GB/T 9271, surface mass I, hardness grade T52, standard Film thickness 0.28mm.
$133.00/packet
PromotionLoading...
Coupon
Model：
PS 2931/2
Pushen PS 2931/2 Tackle iron plateSPEC
Pushen PS 2931/2 Tackle iron plateDetails
Pushen PS 2931/2 Tackle iron platePacking list
- SKU
- NB046979
- Specifications
- 120 * 50 * 0.28mm, rounded corners without holes/holes
- meet the standard
- GB/T 2520
- Surface preparation
- GB/T 9271
- Surface Mass
- Level I
- Hardness grade
- T52
- Film thickness
- 0.28mm
PS 2931/2
Tackle iron plate
Specification parameters 120 * 50 * 0.28mm, rounded corners non-porous, in line with standard GB/T 2520, surface preparation GB/T 9271, surface mass I, hardness grade T52, standard Film thickness 0.28mm.
Introduction
The performance test of industrial coatings, such as adhesion, hardness, impact, flexibility, drying time, bending, etc., is required to be prepared on tinplate when coating, and the amount of tinplate, hardness and surface treatment on the tinplate surface are the most important factors affecting the test results.
The tinplate plates provided by our company are all Baosteel tinplate, evenly tinned on both sides, and a variety of specifications are available for purchase, such as: curled earplate, rounded corners with or without holes, etc. The production volume of a single batch is 10w sheets, with stable quality and quality assurance.
FAQ
QOur laboratory needs to do Coating Impact and Bending tests. What specifications of tinplate should we choose?
A
It is recommended to choose 120 * 50 * 0.28mm PUSHEN tack iron plate, the thickness of 0.28mm conforms to GB/T 9271 standard, and the Hardness T52 is moderate, which can not only withstand the strength of Impact test, but also reflect the film performance in the bending test.
QDoes the surface preparation of tinplate affect the Coating drying time test? Which one to choose?
A
Yes, the amount of tin plating on the surface and the treatment grade directly affect the Coating drying time. This tinplate adopts Baosteel Class I surface, and the double-sided tin plating is uniform, which can provide a stable test base surface and ensure that the drying time test results are accurate and reliable.
Standard