KairDa NDT151P Roughness Gauge brochure

Continue to read

• 
  KAIRDA NDT650 Ultrasonic Flaw Detector high gain 130dB intelligent calibrating

  0~10000mm0.4MHz20MHz≤3%

  ¥9380.0

  SE
• 
  Roughness Gauge measurement platform KAIRDA KA520 swirling/spinning Roughness Gauge measurement platform

  Measurement Platform

  SE
• 
  Shore Hardness Gauge KAIRDA NDT280S Durable Shore hardness testing meter for rolls

  30 ~ 110HS170 ~ 960HLD19 ~ 651HB13 ~ 100HRB17 ~ 68.5HRC59 ~ 85HRA80 ~ 976HVAny (360 °)Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel

  SE
• 
  KAIRDA N02 Ultrasonic Thickness Gauge Probe for measurement of coarse crystal materials such as cast iron

  3.0~300mm2F12mm

  SE
• 
  KAIRDA NDT271 Ultrasonic hardness gauge display

  Perpendicular to the surface of the workpiece under testVickers (HV), Brinell (HB), Rockwell B (HRB), Rockwell C (HRC), Rockwell A (HRA)HV:10～1999/ HB:76～618/ HRB:41～105/ HRC:20.3～68/HRA:60.7～85.6

  ¥9380.0

  SE
• 
  Metal Leeb Hardness Tester KAIRDA NDT290 + Hardness measurement of various metal materials

  170 ~ 960HLD19 ~ 651HB13.5 ~ 101.7HRB17.9 ~ 69.5HRC59.1 ~ 88HRA80 ~ 1042HV30.6 ~ 102.6HSAny (360 °)Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel

  SE
• 
  KAIRDA NDT151P Roughness Gauge

  Ra、Rz、Rq、Rt、Rmax、Rc、Rp、Rv、R3z、R3y Rz(JIS)、Ry(JIS)、Rs、Rsk Rku、Rsm Rmr、RPc Rk、Rpk Rvk、Mr1、Mr2、TP、Rm1、Rm2、Rm3、Rm4Z-axis (vertical) 320μm (12600μin); X-axis (horizontal) 17.5mm (0.71inch)Z-axis (vertical) 0.001 μm/+/- 20 μm 0.002 μm/+/- 40 μm; 0.004 μm/+/- 80 μm 0.008 μm/+/- 160 μm

  ¥4720.0

  SE
• 
  KAIRDA F1 standard probe magnetic Induction NDT530 Coating Thickness Gauge optional probe

  magnetic induction0 ~ 1250µm±3%

  ¥520.0

  SE
• 
  Roughness Gauge Probes (Sensors) KAIRDA KS100 Standard Probes

  Standard probeRoughness measurement of planar and cylindrical surfaces. When measuring the inner surface of the hole, the minimum aperture is 5mm and the maximum depth is 22mm

  SE
• 
  Surface Finish Meter KAIRDA NDT120 Surface Finish Meter is suitable for a variety of surface finish inspections

  digital displayRa、Rz=Ry(JIS)、Rq、Rt=Rmax、Rp、Rv、R3z、R3y、RzJIS、Rs、Rsk、Rku、Rsm、RmrRa: 0.005µm ~ 16.00µm

  SE

• 1HTechMT SP125-S Asperity comparison board brochure
• 2LANDTEK SRT-6210 Roughness Gauge brochure
• 3Leeb LBTQ423 Surface roughness Meter brochure
• 4TQC sheen DC9000 RoughoMeter brochure
• 5KairDa NDT120 Roughness Gauge brochure
• 6Elcometer T224C500US probe brochure
• 7KairDa NDT160 Roughness Gauge brochure
• 8KairDa NDT151 Roughness Gauge brochure
• 9LANDTEK SRT-6223 Roughness Gauge brochure
• 10HBO HCY-200 Handheld surface roughness Meter brochure