HUINUO CP3000-D inks Stirrer 30L/1.5KW
SEThe capacity of the barrel is 30L, the stirring speed is 0-50 rpm (variable frequency speed regulation), the rated power supply is 220V, the rated frequency is 50-60 HZ, the power of the whole machine is 1.5KW, the dimensions are 850 × 700 × 480mm, the size of the barrel is φ 400 × 240mm, and the weight is 178kg.
$5045.00/set
PromotionLoading...
Coupon
Model：
CP3000-D
HuiNuo CP3000-D StirrerSPEC
HuiNuo CP3000-D StirrerDetails
HuiNuo CP3000-D StirrerPacking list
- SKU
- NB047108
- Barrel Volume
- 30L
- Barrel size
- φ400×240mm
- Speed range
- 0~50rpm (variable frequency speed regulation)
- rated Power Supply
- Single phase 220V
- Rated Frequency
- 50 ∽ 60 HZ
- Rated Power
- 1.5KW
- Dimension
- 850*700*480mm
- Weight
- 178kg
CP3000-D
Stirrer
The capacity of the barrel is 30L, the stirring speed is 0-50 rpm (variable frequency speed regulation), the rated power supply is 220V, the rated frequency is 50-60 HZ, the power of the whole machine is 1.5KW, the dimensions are 850 × 700 × 480mm, the size of the barrel is φ 400 × 240mm, and the weight is 178kg.
Introduction
In order to meet the market demand and meet the higher requirements put forward by customers, the new generation of CP3000-D mixer is designed and produced. The operation is simple and convenient; Low-speed, intermittent mixing with the barrel; The unique stirring paddle design allows the ink to be turned and sheared during the stirring process, and the ink can be thoroughly stirred within ten minutes. The ink does not heat up after stirring. Easy to replace the barrel, (stainless steel barrel); The stirring speed can be adjusted by frequency conversion.
Application
Ink factory, paint factory, chemical factory, printing factory, screen printing factory, circuit board factory, garment factory, etc.
FAQ
QI'm looking for a Stirrer that can quickly mix inks evenly, any recommendations?
A
The CP3000-D Stirrer uses a unique Impeller design, which can thoroughly mix inks by flipping and shearing within ten minutes, and the inks do not heat up after stirring, which is very suitable for occasions such as inks plants and printing plants that require efficient stirring.
QOur chemical factory needs to mix viscous coatings. Which Stirrer is suitable?
A
CP3000-D Stirrer is suitable. It supports low-speed intermittent barrel edge stirring, which can effectively handle viscous materials. The frequency conversion speed regulation function allows you to flexibly adjust the Rotation speed according to the viscosity of the Coating to avoid splashing or uneven stirring.
QFunctionally, what are the bright points of the CP3000-D Stirrer?
A
Its bright points include frequency conversion speed regulation for easy control of stirring speed, unique Impeller to ensure rapid and uniform mixing of materials, and the barrel can be replaced with a design, simple operation, suitable for frequent replacement of different ingredients factory use.
Standard