Coil drawdown blade Automatic Film Applicator Rxg-01/400 tape unwinding + scraping + drying + winding function
SE
Rxg-01/400
Factory Rxg-01/400 Automatic Film ApplicatorSPEC
Factory Rxg-01/400 Automatic Film ApplicatorDetails
Factory Rxg-01/400 Automatic Film ApplicatorPacking list
- SKU
- NB047317
- Spreader
- Roll → Scratch → Drying → Roll
- Coating speed
- 1~10m/min
- application width
- 100-400Mm adjustable
- WFT
- 0.005-3mm
- Device size
- Subject to actual customization
- maximum discharge
- 400mm
- Maximum charge
- 400mm
- Effective application width
- 400mm
- Drying Temperature range
- Room temperature -200 ℃
- Drying channel length
- 1m
- Drying Power
- 1KW
- Power/Power
- 220V/2.5KW
- rubber roller
- Heating temperature: room temperature~ 200 ℃
- Spreader head
- Adjustable doctor blade Spreader
- Coating size
- Max.400mm
Product introduction
Rxg-01/400 coil scraper automatic coating machine is a continuous roll-to-roll coating machine with the functions of unwinding, scraping, drying and winding. The coating width is 400mm, and the rubber roller can be heated up to 200 ℃. It is suitable for self-adhesive, plaster, paste, etc.
Product Structure
The machine consists of a body, a gluing width adjusting device, a discharge rack, a gluing roller group, a thickness adjusting dial, a transmission platform, a traction roller group, and a transmission mechanism.
1. Body: The body of the equipment is composed of all aluminum alloy + high electrostatic spray plate.
2. Glue width adjustment device: The width adjustment device is composed of food-grade plastic and adjustable braces.
3. Discharge rack: The machine is equipped with two discharge racks. When the two materials are misaligned during the cladding process, the correction device automatically adjusts the material rack to move left and right to achieve the effect of aligning the two materials.
4. Coating roller group: Coating roller group is made of double roller precision machining parts, with smooth transmission.
6. Thickness adjustment dial: the adjustment of the required coating thickness when applying glue. Rotate the left and right handwheels on the rubber roller frame clockwise or counterclockwise to adjust the thickness of the glue. The specific thickness is determined according to the instructions of the dial.
7. Transmission platform: The transmission platform is made of stainless steel, and its main function is to connect the glued substrate to the next process.
8. Traction roller group: The substrate is pulled by hand between the upper and lower rollers of the traction roller, the handwheel on the rack is tightened to make the traction roller, the rubber ring of the upper roller is in contact with the lower roller, and the traction roller group pulls the substrate through power transmission to complete the coating work.
- 1Application and technical advantage of roll-to-roll coater in preparation of hot-melt adhesive plaster
- 2Discuss the key technologies of small roll-to-roll coater: Spreader head, roller, drive and drying
- 3Overview of Roll-to-Roll Film Applicator Technology
- 4Automatic Film Applicator technology analysis
- 5Research and application of roll-to-roll coater selection technology
- 6Technical Principle, Application and Selection of PT Film Roll-to-Roll Film Applicator
- 7Overview and comparative analysis of roll-to-roll coater and double-sided coater technology
- 8Deep analysis of tension control principle of coater coil
- 9Overview and skills of laboratory roll-to-roll coater technology
- 10Comparative Analysis of Small Spreader and Traditional Roll-to-Roll Coater