JINGRUI SX2 - 2.5-12 G laboratory muffle furnace operating temperature ≤ 1100 ℃ temperature control accuracy +/- 1 ℃

SX2-2.5-12G

Box Furnace

Laboratory muffle furnaceoverview

The design temperature of the elite SX2-2.5-12G laboratory muffle furnace is 1200 °C, and the temperature control accuracy is ±1 °C.SX2-2.5-12G laboratory muffle furnace has a built-in door opening and power-off protection system, which has good safety.

Features

1. One-piece structure, fashionable and generous appearance.

2. The box made of good cold-rolled steel plate is pickled and phosphated, refined, and the surface is electrostatically sprayed.

3、eliteSX2-2.5-12G Laboratory Muffle FurnaceThe heating element is made of steel flower brand furnace wire, which is cost-effective and stable.

4. The intelligent OID temperature control instrument displayed by the digital tube is selected, with high temperature control accuracy, self-tuning, fault self-diagnosis and other functions.

5. The muffle furnace adopts a fully closed furnace door and a technical furnace door structure. Ensure that the high temperature in the furnace does not leak out, so as to improve the Operating Environment, prolong the service life of the electric furnace, and save energy.

6. The thermocouples are all made of stainless steel armored structure, with high temperature control accuracy and long life.

7. Safety protection measures: the breakpoint protection system will be automatically started when the furnace door is opened, and it has the function of preventing the Resistance Furnace from heating after the power supply line is restored.

Actual picture of the product

Options

Can be installed configuration: flue; Air intake system (for inert gases); Paperless Recorders;

Optional : optional 30-segment program temperature control instrument; Crucible; crucible pliers; Furnace floor

Packing list：Resistance furnace x1, manual x1, certificate x1, Encasement box x1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.