LABTOP OBCEA-3B Multi-point Magnetic Stirred Thermostatic Bath 12L/3 Stirring Point

OBCEA-3B

Multipoint Magnetic Stirred Thermostatic Bath

RT + 10~80 ℃, Temperature Fluctuation +/- 0.05K, Temperature display LED, Display accuracy 0.1 ℃, Temperature Control mode Intelligent PID, Control temperature sensor PT 100, Heating power 2000W, Pump Maximum Flow rate 12L/min, Sink volume 12L.

OBCEA series multi-point magnetic stirring Water Bath thermostatic bath is composed of transparent open thermostatic bath and multi-point magnetic stirrer, the constant temperature is responsible for the temperature control in the bath, the multi-point magnetic stirrer is responsible for stirring the sample, the sample cup is placed in the transparent bath, due to the large opening of the tank and the strong magnetic stirring capacity, the sample cup specifications of multiple sample cups and various containers can be stirred, plus the precise temperature control of the thermostatic bath, so that the sample temperature is more accurate.

Here are a few notes

1. "*" indicates that external refrigeration equipment is required, and the minimum temperature reached is different for different external refrigeration equipment

2. Model definition: OBCEA-xB [e.g. OBCEA-4B], where OBC represents open constant temperature circulating tank, E represents Water Bath economy [SM stands for standard type... and so on], A means that the slot is a PC transparent material [B means stainless steel material...]; x is the number of magnetic stirring points, B is the basic type of magnetic stirring [C is the control type]. The front is a Water Bath specification, and the rear is a magnetic stirring specification

3. When the temperature needs to be controlled at or below room temperature, it is necessary to choose a cooling plate + low temperature cooling circulator + insulation pipe; Or optional external control solenoid valve + cooling coil + insulation pipe + tap water

 Features

• Waterproof operation panel, high-brightness four-digit LED display, display accuracy of 0.1, the machine can indicate heating, refrigeration, circulation, external temperature control of various operating states;

• Primary PID control technology, temperature stability, stability ± 0.05°C;

• Single-point calibration function, which can easily calibrate the temperature of a certain point;

• The powerful immersion pressure suction pump can stir and mix the liquid in the tank horizontally and vertically to ensure that the temperature of the liquid in the tank is uniform, and the large-opening bath design can place multiple samples in the tank for constant temperature;

• Two-level safety protection: the first level of low-level protection; The second level of high temperature and low temperature protection, a variety of alarm codes are directly displayed, the error point can be directly determined, and the buzzer can be set to silent or sound when alarming;

• Three operating modes are selectable, and automatic power-on operation can be set (continue to run after unexpected power failure).

• Each station of magnetic stirring adopts an independent DC brushless motor, which has low noise, long life and high efficiency.

• Each station of magnetic stirring adopts independent high-performance magnets, which are resistant to high temperature, corrosion, strong magnetic field and large stirring strength.

• Each station of magnetic stirring can be timed and timed to assist the experimenter to understand the experimental process, so as to obtain more realistic and reproducible experimental data. (Optional)

• Magnetic stirring can be set to run forward and backward, and forward and reverse alternately. (Optional)

• Magnetic stirring digital display channel and actual speed; The knob sets the parameters, which is convenient and fast.

• Self-diagnosis function: When the equipment fails, the fault information is displayed to facilitate the judgment of the fault point.

• Stainless steel cooling coil can be optional, and the value-added cooling coil can be connected to external tap water or external cooler to achieve high temperature cooling function, and can also realize temperature control at room temperature and below room temperature;

• External solenoid valve, optional external solenoid valve, can automatically control the on-off of external tap water or external cold source, automatically realize the high temperature cooling function, and can also automatically realize the temperature control of room temperature and lower than room temperature;

apply

1. Temperature control and stirring of multiple samples at different temperatures.

2. Preparation of samples, such as continuous testing of multiple samples in the process of viscosity testing.

Packing list：

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.