Duban DB22-LX-SC Foundry sand Hardness Gauge & wet mold sand Hardness Gauge brochure

• 
  DUBAN DB13-934-1 + Pasteur hardness Measurement range 0~100HBa Additional measurement of Brinell/Vickers/Wechsler/rockwell hardness

  0~100HBa, equivalent to 25~ 150HBW0.1HBa81~88HBa ±1HBa

  ¥4862.0

  SE
• 
  DUBAN DB25-204SPT 5KN Ponzi Tensiometer, Range +/- 4900N

  0.01kgf (<100kgf)、0.1kgf (≥100kgf)；0.1N (<1000N)、1N (≥1000N)；0.1Lbf (<1000Lbf)、1Lbf (≥1000Lbf)Level 0.5+/- 0.5% FS (range) +/- 1 digital peak

  ¥3146.0

  SE
• 
  DUBAN DB25-207FM-2KN Split Force Gauge External Thrust Tensile Tester

  ±200kgf;±1960N;±440Lbf0.01kgf (<100kg);0.1kgf (100kgf);0.1N (<1000N);1N (1000N);0.1LbfLevel 0.2

  ¥2788.0

  SE
• 
  DUBAN DB22-CM222H Anti-corrosion layer Thickness Gauge

  LCD backlight liquid crystal display0.01Mm (below 1.0mm)/0.1mm (above 1mm)1~ 3% n or 0.2mm

  ¥3861.0

  SE
• 
  DUBAN DB30-6226F Noise Spectrum Analyzer Measurement range 25dB~ 130dB

  φ 12.7mm (1/2 ") test condenser microphone10Hz~20kHzA Weighting, C Weighting, Lin (linear)

  ¥3380.0

  SE
• 
  DUBAN DB25-204SPT 20KN Ponzi Tensiometer, Range +/- 16900N

  ±1000kgf、±9800N、±2200Lbf0.01kgf (<100kgf)、0.1kgf (≥100kgf)；0.1N (<1000N)、1N (≥1000N)；0.1Lbf (<1000Lbf)、1Lbf (≥1000Lbf)Level 0.5

  ¥3146.0

  SE
• 
  DUBAN DB22-TM240T6 Multimode Ultrasonic Thickness Gauge

  Two Operating Modes of thickness measurement, single point mode and scan modeLCD with backlightPulse echo mode: 0.65mm-600mm (steel); echo mode: 3mm~ 60mm

  ¥4290.0

  SE
• 
  DUBAN DB20-LX-DO Type Shore Durometer R1.2/4536gf Semi-hard Rubber

  0.1H≤1H>90C <20D

  ¥2002.0

  SE
• 
  DUBAN DB22-VM260A20 Vibrator, circumferential displacement D 0.001~ 20.0mm

  Displacement D: 0.001~ 20.0mm (peak-to-peak P-P); Speed V: 0.01~ 2000.0mm/s (true RMS); Acceleration A: 0.1~ 2000 m/s ² (peak P); Frequency: 1~ 20,000HzDisplacement D: 5Hz~ 1KHz; Speed V: 5Hz~ 1KHz; Acceleration A: 5Hz~ 10KHzTemperature: 0~50 ℃; Humidity: < 90%

  ¥4420.0

  SE
• 
  DUBAN DB25-204FM-5N Integrated Force Gauge Built-in Force Gauge

  ±0.5kgf；±500gf；±4.9N；±1.1Lbf0.001kgf；1gf；0.01N；0.001LbfLevel 0.5

  ¥1144.0

  SE

• 1AMITTARI AW-20B Wechsler Hardness Tester brochure
• 2SMTMF HRM-45DT Rockwell Hardness Tester brochure
• 3HBO HS-B Digital B rubber Hardness Gauge brochure
• 4LANDTEK HT-6510S-B Sand surface Hardness Gauge brochure
• 5LANDTEK FM204-TR Soil Hardness Gauge brochure
• 6Duban DB25-204TR Soil duroMeter & soil compactness Tester brochure
• 7LANDTEK FM-204T Tablet Hardness Gauge brochure
• 8LANDTEK HM-934-1+ Pasteur Hardness Gauge brochure
• 9Duban DB22-LX-SB Foundry sand Hardness Gauge & wet mold sand Hardness Gauge brochure
• 10AMITTARI AW-20B+ Wechsler Hardness Tester brochure