Duban UTTM4-DB25-204FM-2N Tensile Tester brochure

Related products

DUBAN DB22-VM260A Vibration instrument, displacement D 0.001~ 4.0mm
Displacement D: 0.001~ 4.0mm (peak-to-peak P-P); Speed V: 0.01~ 400.0 mm/s (true RMS); Acceleration A: 0.1~ 400 m/s ² (peak P); Frequency: 1~ 20,000HzDisplacement D: 5Hz~ 1KHz; Speed V: 5Hz~ 1KHz; Acceleration A: 5Hz~ 10KHzTemperature: 0~50 ℃; Humidity: < 90%

¥2080.0
SE
DUBAN DB10-4221 Acoustic calibrator Class 1
94dB and 114dB (based on 20µPa)Level 11000 + 0.1% Hz (thus correcting on A, B, C, D or Linear Frequency Weighting)

¥1950.0
SE
DUBAN DB22-FPM42K Stroboscope 50~42000 FPM
5-Position 10mm LCD display0.1FPM (below 1000 FPM); 1FPM (above 1000 FPM);50~42000 FPM

¥1950.0
SE
DB25-207FM-20KN Split Force Gauge External Thrust Tensile Tester
±2000kgf;±9999N;±4400Lbf0.01kgf (<100kg),0.1kgf (≥100kgf);0.1N (<1000N),1N (≥1000N);0.1Lbf (<1000Lbf),1Lbf (≥1000Lbf)Level 0.2

¥3432.0
SE
DUBAN DB25-204FM-20N Integrated Force Gauge Tester
±2kgf；±2000gf；±19.6N；±4.4Lbf0.001kgf；1gf；0.01N；0.001LbfLevel 0.5

¥1144.0
SE
DUBAN DB25-204G Grain feed pellet durometer
0Kgf-20Kgf,0N-196N,0F-4426F0.01Kgf0.1N,0.0126F1 5mm

¥2574.0
SE
DUBAN DB20-CM212 Statistical Coating Thickness Gauge integrated probe 0~1250µm
0~1250µm/0~50mil (Miscellaneous Measurement range can be customized)0.1 µm (below 100 µm); 1 µm (above 100 µm); 0.1 mil+/- 1 to 3% n or +/- 2.5 µm or 0.1 mil

¥3217.0
SE
DUBAN DB20-LX-T5 Spinning & weaving Hardness Gauge
Hardness/Average/MAX MaximumSpherical 5mm φThe curved end of the probe is used for bobbins with a diameter of less than or equal to 400mm, and the flat end of the probe is suitable for bobbins with a diameter greater than 400mm

¥2574.0
SE
DUBAN DB25-204FM-200N Integrated Force Gauge Digital Push-pull Force Tester
±20kgf；±196N；±44Lbf0.01kgf；0.1N；0.01LbfLevel 0.5

¥1144.0
SE
DUBAN DB20-LX-O Shore Durometer R1.2/822gf Soft Rubber
0.1H≤1H<20DO

¥2002.0
SE

Recommended for more brochure