Duban DB20-CM212 Coating Thickness Gauge brochure

Related products

DUBAN DB30-6226LEQ Integrating Sound Level Meter, Integrating Noise Meter Level 2
20Hz-8kHz16.12.7Mm (1/2 ") test condenser microphoneA Weighting, C Weighting, Lin (linear)

¥2860.0
DUBAN DB20-LX-AM AM Shore Durometer 35 °/0.79/77 Thin Rubber
0.1H≤1H10~90 HA/HD(B/C/E/O/DO/OO)

¥4576.0
SE
DUBAN DB22-VM260A12 Vibrator, displacement D 0.001~ 12.0mm
Displacement D: 0.001~ 12.0mm (peak-to-peak P-P); Speed V: 0.01~ 1200.0 mm/s (true RMS); Acceleration A: 0.1~ 1200 m/s2 (peak P); Frequency: 1~ 20,000HzDisplacement D: 5Hz~ 1KHz; Speed V: 5Hz~ 1KHz; Acceleration A: 5Hz~ 10KHzTemperature: 0~50 ℃; Humidity: < 90%

¥3380.0
SE
DUBAN DB22-DT237PC Intelligent Rotation speed meter
LCD backlight displayLaser: 2.5-99, 999 r/min; Contact: 0.5-19, 999 r/min; Linear velocity: 0.05-1999 m/min; 0.2-6560 ft/min50~250Mm (typical) up to 600mm depending on luminance

¥1560.0
SE
DUBAN DB25-207FM-5KN Split Force Gauge External Push-Pull Tester
±500kgf;±4900N;±1100Lbf0.01kgf (<100kg),0.1kgf (≥100kgf);0.1N (<1000N),1N (≥1000N);0.1Lbf (<1000Lbf),1Lbf (≥1000Lbf)Level 0.2

¥3003.0
SE
DUBAN DB20-LX-T5 Spinning & weaving Hardness Gauge
Hardness/Average/MAX MaximumSpherical 5mm φThe curved end of the probe is used for bobbins with a diameter of less than or equal to 400mm, and the flat end of the probe is suitable for bobbins with a diameter greater than 400mm

¥2574.0
SE
DUBAN DB20-LX-D Type D Shore Durometer 30 °/R0.1/4536gf Hard Rubber/Hard Plastic
0.1HD≤1HD>90A

¥1716.0
SE
DB30-6226I pulse sound level meter, pulse decibel level 2
Φ12.7mm (1/2 ") test condenser microphoneA Weighting, C Weighting, Lin (linear)20Hz-8kHz

¥2600.0
SE
DUBAN DB20-SRT231 + sand blasting shot peening Surface Roughness Tester
LCD display+/- 5% or +/- 5a0.1 μm (Measured value < 100 μm)

¥2860.0
SE
DUBAN DB22-CM221 Coating Thickness Gauge with F/NF probe Measurement range 0~2000μm
F magnetic Induction & NF eddy current0~2000μm (Miscellaneous Measurement range can be customized)0.1μm /1μm

¥2145.0
SE

Recommended for more brochure