DUBAN DB20-CM211 Basic Coating Thickness Gauge iron-based and non-iron-based dual-use

DB20-CM211

Coating Thickness Gauge

Integrated design, using magnetic Induction and eddy Current two thickness measurement principles, thickness measurement range of 0~1250 microns, with manual shutdown, automatic shutdown and underVoltage prompt and other functions.

Introduction

Coating Thickness Gauge DB20-CM211 series instruments are divided into two types: (monolithic) and (split); The most widely used and most accurate measurement, it can measure almost all substrates, whether ferrous or non-ferrous; And with RS-232C data connection cable, USB data connection and Bluetooth transmission function; The monolithic instrument is suitable for one-handed operation and the measurement is more stable, because the large contact surface of the large type of probe has better stability in the measurement, so that the user can obtain a continuous and repeatable accurate measurement result; The split type offers a variety of probes for greater measurement mobility.

Features

• All-in-one design, "big head" measuring probe.

• Thickness Gauge for both ferrous and non-ferrous coatings.

• There are two types of measurement options: single and continuous.

• Converting metric/imperial units with functions such as manual shutdown, automatic shutdown and underVoltage prompting.

• Automatic memory of calibration values and automatic identification of the material of the tested substrate; There is a buzzer prompt sound during operation, and the buzzer does not sound during continuous measurement.

• USB data cable output, RS-232C data connection cable and software are used to communicate with the PC; Optionally configurable Bluetooth and Bluetooth™ data output options are also available.

Packing list：Host X1, wrist rope buckle, iron base (1 piece) X1, aluminum base (1 piece) X1, calibrated diaphragm (1 set) X1, measurement Sensors X1, portable case X1, operation manual X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.