KairDa NDT271 Ultrasonic hardness gauge brochure

Continue to read

• 
  Leeb Hardness Tester Impact device (probe) KAIRDA DL type measurement slender narrow groove or hole

  11mJ5.5g/7.2g1600HV

  SE
• 
  KAIRDA NDT180 Roughness Gauge

  Z-axis (vertical): 640μm (-320μm~ 320μm); X-axis (horizontal): 17.5mm (0.69 inch)Z-axis (vertical): 0.002μm/+/- 20μm; 0.004μm/+/- 40μm; 0.008μm/+/- 80μm; 0.020μm/+/- 160μmRa Rz Rq Rt Rc Rp Rv R3z R3y Rz(JIS)Ry Rs Rsk Rku Rmax Rsm Rmr RPc Rk Rpk Rvk Mr1 Mr2

  ¥8450.0

  SE
• 
  KAIRDA NDT361 Penetrable coating Thickness Gauge 0.15-20 mm

  0.15mm~ 20mm (steel) (single crystal probe)0.001mm15MHz

  ¥6850.0

  SE
• 
  KAIRDA N1 standard probe eddy Current NDT530 Coating Thickness Gauge optional probe

  eddy current0 ~ 1250µm±3%

  ¥520.0

  SE
• 
  Roughness Gauge Probes (Sensors) KAIRDA KS120 Small Hole Probe

  Small hole probeRoughness of the inner surface of the hole with an aperture greater than 2mm can be measured, the maximum depth is 9mm, and the plane and cylinder can also be measured

  SE
• 
  KAIRDA NDT151P Roughness Gauge

  Ra、Rz、Rq、Rt、Rmax、Rc、Rp、Rv、R3z、R3y Rz(JIS)、Ry(JIS)、Rs、Rsk Rku、Rsm Rmr、RPc Rk、Rpk Rvk、Mr1、Mr2、TP、Rm1、Rm2、Rm3、Rm4Z-axis (vertical) 320μm (12600μin); X-axis (horizontal) 17.5mm (0.71inch)Z-axis (vertical) 0.001 μm/+/- 20 μm 0.002 μm/+/- 40 μm; 0.004 μm/+/- 80 μm 0.008 μm/+/- 160 μm

  ¥4720.0

  SE
• 
  KAIRDA NDT530 (N1) Zinc Coating Thickness Gauge with eddy Current Probe

  Eddy Current0~1250μm±2%

  ¥1380.0

  SE
• 
  Surface Finish Meter KAIRDA NDT120 Surface Finish Meter is suitable for a variety of surface finish inspections

  digital displayRa、Rz=Ry(JIS)、Rq、Rt=Rmax、Rp、Rv、R3z、R3y、RzJIS、Rs、Rsk、Rku、Rsm、RmrRa: 0.005µm ~ 16.00µm

  SE
• 
  Leeb Hardness Tester Impact device (probe) KAIRDA type C measurement small thin parts and surface hardening layer

  2.7mJ3.0g1600HV

  SE
• 
  Hardness test of roll Shore Hardness Gauge KAIRDA NDT290S cast steel roll, forged steel roll, cast iron roll

  30 ~ 110HS170 ~ 960HLD19 ~ 651HB13 ~ 100HRB17 ~ 68.5HRC59 ~ 85HRA80 ~ 976HVAny (360 °)Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel, cast steel rolls, forged steel rolls, cast iron rolls

  SE

• 1yushindt LM100 Leeb Hardness Tester brochure
• 2KairDa NDT290+ Leeb Hardness Tester brochure
• 3Leeb leeb110 Leeb Hardness Tester brochure
• 4SADT HARTIP3210 Leeb Hardness Tester brochure
• 5PhaseII MET-HB50 Ultrasonic Hardness Tester brochure
• 6PhaseII PHT-6030 Portable Ultrasonic Hardness Tester brochure
• 7PhaseII PHT-6100 Portable Ultrasonic Hardness Tester brochure
• 8TIMES TH140 Leeb Hardness Tester brochure
• 9LANDTEK Leeb Hardness Tester brochure
• 10yushindt LM300 Leeb Hardness Tester brochure