KairDa NDT3710+ Electromagnetic ultrasonic Thickness Gauge brochure

• 
  KAIRDA NDT150A Surface Roughness Tester

  Z-axis (vertical): 160μm; X-axis (horizontal): 17.5mm (0.69inch)0.002μm/±20μm；0.004μm/±40μm；0.008μm/±80μmRa、Rz==Ry(JIS)、Rq、Rt==Rmax、Rp、Rv、R3z、R3y、Rz(JIS)、Rs、Rsk、Rku、Rsm、Rmr、RPc、Rk、Rpk、Rvk、Mr1、Mr2

  ¥4000.0

  SE
• 
  KAIRDA NDT3710S electromagnetic ultrasonic Thickness Gauge, non-contact thickness Measurement Instrument 1.0~640mm

  80MSPS2.5MHz～6MHz±600V_400Hz_125ns

  ¥25000.0

  SE
• 
  KAIRDA HT5 (0~350 ℃) Ultrasonic Thickness Gauge Probe, High Temperature Resistant

  probe

  SE
• 
  KAIRDA NDT320 Ultrasonic Thickness Gauge thickness measurement for hulls, pipes, high Voltage vessels, boilers, plastics, etc

  0.75~ 300mm (probe determined)5MHzSplit probe

  SE
• 
  Roughness Gauge Probes (Sensors) KAIRDA KS131 Deep Groove Probe

  Deep groove probeIt can measure grooves with a groove width of more than 3mm and a groove depth of less than 10mm; or the surface Roughness of steps with a height of less than 10mm, and can also measure planes and cylinders.

  SE
• 
  KAIRDA NDT280 + Portable Leeb Hardness Tester metal shell color screen

  HLD (170-960) loyal HRC (30.6-102.6) loyal HRC (17.9-69.5) loyal HB (19-683) loyal HV (80-1042) loyal HRA (59.1-88) loyal HRB (13.5-101.7)Any (360 °)Steel and cast steel, alloy tool steel, stainless steel, gray cast iron, ductile cast iron, cast aluminum alloy, copper zinc alloy (brass), copper tin alloy (bronze), pure copper, forged steel

  ¥1550.0

  SE
• 
  KAIRDA F190 ° 90 ° Right Angle Probe Optional probe for NDT530 Coating Thickness Gauge

  magnetic induction0 ~ 1250µm±3%

  ¥2550.0

  SE
• 
  KAIRDA N02 Ultrasonic Thickness Gauge Probe for measurement of coarse crystal materials such as cast iron

  3.0~300mm2F12mm

  SE
• 
  KAIRDA NDT310 Ultrasonic Thickness Gauge Metal, Glass, Ceramic, Sheet, etc. thickness measurement 0.1/0 accuracy

  5MHzSplit probeF4mm

  SE
• 
  Roughness Gauge Probes (Sensors) KAIRDA KS100 Standard Probes

  Standard probeRoughness measurement of planar and cylindrical surfaces. When measuring the inner surface of the hole, the minimum aperture is 5mm and the maximum depth is 22mm

  SE

• 1DAKOTA PT-700-2405 Magnetic probe brochure
• 2DAKOTA PT-703-1405 Magnetic probe brochure
• 3Defelsko Standard UTGM1-E Ultrasonic Thickness Gauge brochure
• 4DAKOTA X-752-0000 Pen probe delay block brochure
• 5DAKOTA MVX Ultrasonic Thickness Gauge brochure
• 6DAKOTA X-132-0000 Tapered delay block brochure
• 7Duban DB22-TM240T3 Penetration coating Ultrasonic Thickness Gauge brochure
• 8yushindt UM-1D Ultrasonic Thickness Gauge brochure
• 9yushindt UM-4 Ultrasonic Thickness Gauge brochure
• 10DAKOTA PT-703-2405 Magnetic probe brochure