Duban UTTM7-DB25-204FM-20N Tensile Tester brochure

Related products

DUBAN DB30-6228F Noise Spectrum Analyzer Measurement range 25dB~ 130dB
φ 12.7mm (1/2 ") test condenser microphone20Hz~8kHzA Weighting, C Weighting, Lin (linear)

¥6760.0
SE
DUBAN DB30-6228ILEQ Pulse Integrator Sound Level Meter, Pulse + Integrator + Statistical Level 1 Sound Level Meter
16.12.7Mm (1/2 ") test condenser microphoneA Weighting, C Weighting, Lin (linear)10Hz-20kHz

¥6240.0
SE
DUBAN DB22-LX-SC casting sand Hardness Gauge Sand Hardness Gauge Load 1500g
2.50mm1500g180g

¥1859.0
SE
DUBAN DB20-LX-T5 Spinning & weaving Hardness Gauge
Hardness/Average/MAX MaximumSpherical 5mm φThe curved end of the probe is used for bobbins with a diameter of less than or equal to 400mm, and the flat end of the probe is suitable for bobbins with a diameter greater than 400mm

¥2574.0
SE
DUBAN DB22-CM222H Anti-corrosion layer Thickness Gauge
LCD backlight liquid crystal display0.01Mm (below 1.0mm)/0.1mm (above 1mm)1~ 3% n or 0.2mm

¥3861.0
SE
DUBAN DB22-VM260A16 Vibrator, displacement D 0.001~ 16.0mm
Displacement D: 0.001~ 16.0mm (peak-to-peak P-P); Speed V: 0.01~ 1600.0 mm/s (true RMS); Acceleration A: 0.1~ 1600m/s ² (peak P); Frequency: 1~ 20,000HzDisplacement D: 5Hz~ 1KHz; Speed V: 5Hz~ 1KHz; Acceleration A: 5Hz~ 10KHzTemperature: 0~50 ℃; Humidity: < 90%

¥3900.0
SE
DUBAN DB22-LX262 luminometer Integrated Sensors
4-Bit 10mm LCD0~4,999 Lux1Lux

¥1430.0
SE
DUBAN DB25-204TM-20Nm Handheld Torque Gauge with three-jaw chuck 3mm-16mm as standard
±2kgf.m/±2000gf.m/±20N.m/±4.4Lbf.m0.001kgf/1gf/0.01N/0.001Lbf3mm-16mm

¥3432.0
SE
DUBAN DB22-TM240B high-precision Ultrasonic Thickness Gauge 300mm/0.01mm
Ultrasonic 5MHz φ 80.5% H + 0.1 (H is the thickness of the material being tested)500~9000 m/s

¥3003.0
SE
DUBAN DB25-204DJ Platts Penetration Meter & Fill Density Meter
0kg~100kg (0 N- 1000N)0cm~30cmAfter rolling, various backfills, clays, sands and mixed soils, etc

¥2145.0
SE

Recommended for more brochure