China

JINGKELIAN QNB No.4 ISO Flow Cup outflow time 30s ≤ t ≤ 100s diameter 4mm

SE
Viscosity range 35~ 135cSt, outflow time 30~100s, flow hole diameter 4mm, flow hole diameter error +/- 0.01mm, cup body material stainless steel, filter material stainless steel, Applicable standard ISO 2432-1993, GB/T6753.4-86
$138.00/piece
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con VIDEO OI
Similar products

JingKeLian QNB No. 4 ISO Flow CupSPEC

JingKeLian QNB No. 4 ISO Flow CupDetails

JingKeLian QNB No. 4 ISO Flow CupPacking list

SKU
NB004766
Viscosity range
35~135cSt
outflow time
30~100s
Flow hole diameter
4mm
Flow hole diameter error
±0.01mm
Cup body material
stainless steel
Filter material
stainless steel
Applicable standard
ISO 2432-1993、GB/T6753.4-86
Certificate
without
QNB No. 4
ISO Flow Cup
Viscosity range 35~ 135cSt, outflow time 30~100s, flow hole diameter 4mm, flow hole diameter error +/- 0.01mm, cup body material stainless steel, filter material stainless steel, Applicable standard ISO 2432-1993, GB/T6753.4-86
JINGKELIAN QNB No.4 ISO Flow Cup outflow time 30s ≤ t ≤ 100s diameter 4mm Picture

Introduction of ISO outFlow Cup

JinKeLian QNB ISO outFlow Cup has three types of outflow Viscosity Cups, QNB No. 3, No. 4 and No. 6. This ISO outFlow Cup is developed by integrating the relevant provisions of the national standard and the international standard. It adopts stainless steel material. QNB No. 3/No. 4/No. 6 ISO outFlow Cup is used to test the outflow time of Newtonian or near-Newtonian liquids, and the applicable test outflow time range is 30s~100s.

application standard

1. International standard ISO2432-1993 "Determination of outflow time with outFlow Cup for paints and varnishes" (fourth edition)

2. National standard GB/T6753.4-86 "Determination of coating flow time - ISO Flow Cup method"

Specifications

modelOutlet diameter (mm)Viscosity range (mm²/s)
QNB No. 33.0± 0.01mm7-40 mm²/s
QNB No. 44.0± 0.01mm35-135 mm²/s
QNB No. 66.0± 0.01mm134-685 mm²/s

Other parameters

Executive standardGB/T6753.4-86, 1ISO243-1993
outflow time30s≤t≤100s

Introduction

Details of JinKeLian QNB No. 4 ISO outFlow Cup 1

FAQ
QEpoxy resin Coating viscosity measurement with what material Viscometer is better?
A Measurement Coating viscosity generally can choose viscosity cup or Viscometer, viscosity cup mainly measures relative viscosity, Viscometer measures dynamic viscosity. In general, in addition to thixotropic Coating, Coatings under 150s can be coated with 4 cups, and Coatings under 20 can be coated with 1 cup. In addition, Yehui uses ISO flow cup to measure Newton-type liquid Coating viscosity, Stormer Viscometer to measure architectural coatings viscosity, and for all brush coatings, rotational viscometer or Cone and Plate Viscometer measurement can be used.
QIs this the ISO flow cup mentioned in JJG743?
A OK
Standard
Filter Brand Store Contact