AMITTARI SPT-104-10T side Tension Tester, side Tension Tester 98000N
SEMeasurement range +/- 10000kgf; +/- 98000N; +/- 22000Lbf, high-precision high resolution, N (Newton), kg (kg), lb (lb), g (g) four measurement units optional, measurement wind tower, signal tower\ power transmission system and other rope tension of a special instrument.
$610.00/set
PromotionLoading...
Coupon
Model：
SPT-104-10T
AMITTARI SPT-104-10T side tensIon MeterSPEC
AMITTARI SPT-104-10T side tensIon MeterDetails
AMITTARI SPT-104-10T side tensIon MeterPacking list
- SKU
- NB047688
- Measurement range
- ±10000kgf；±98000N；±22000Lbf
- resolution
- 0.01kgf (<100kgf)、0.1kgf (≥100kgf)；0.1N (<1000N)、1N (≥1000N)；0.1Lbf (<1000Lbf)、1Lbf (≥1000Lbf)
- Accuracy class
- Level 0.5
- Accuracy
- +/- 0.5% FS (range) +/- 1 digital peak
- unit
- kgf, N, Lbf
- Measured value
- Peak, instantaneous value
- show
- Four large LCD, forward and reverse dual display
- shutdown mode
- 10 minutes automatic shutdown or manual shutdown
- Backlight
- Blue Backlight
- Allowable load
- 150% F.s (buzzer alarm when it exceeds 110% F.s)
- Power Supply
- 2 AA batteries or 5V DC Power Supply
- Operating temperature
- 0℃~40℃
- Operating humidity
- < 80%
- Operating Environment
- No source and corrosion medium around
- Net Weight
- 1165g
- Host size
- 175mmx80mmx36mm
- Sensors size
- 140mmx65mmx105mm
SPT-104-10T
side tensIon Meter
Measurement range +/- 10000kgf; +/- 98000N; +/- 22000Lbf, high-precision high resolution, N (Newton), kg (kg), lb (lb), g (g) four measurement units optional, measurement wind tower, signal tower\ power transmission system and other rope tension of a special instrument.
Introduction
The side pressure Tension Tester is a special instrument for measuring the rope tension of wind towers, signal transmission towers, power transmission systems, etc. It is easy to operate and easy to carryMerit. It also has a variety of test modes, which is convenient for Testers to use.
Features
High precision and high resolution. Digital display, no parallax.
N (Newton), kg (kg), lb (pound), g (gram) four units of measurement are available and converted to each other.
Peak hold function. Hold the peak display until it is manually cleared.
Can be powered by alkaline batteries; It can also be connected to a 5V DC power supply.
Serial models
| Model | Measuring range | resolution |
| SPT-104-500K | ±500kgf ±4900N ±1100Lbf | 0.01kgf (<100kgf) 0.1kgf (≥100kgf) 0.1N (<1000N) 1N (≥1000N) 0.1Lbf (<1000Lbf) 1Lbf (≥1000Lbf) |
| SPT-104-1T | ±1000kgf ±9800N ±2200Lbf | 0.01kgf (<100kgf) 0.1kgf (≥100kgf) 0.1N (<1000N) 1N (≥1000N) 0.1Lbf (<1000Lbf) 1Lbf (≥1000Lbf) |
| SPT-104-2T | ±2000kgf ±16900N ±4400Lbf | 0.01kgf (<100kgf) 0.1kgf (≥100kgf) 0.1N (<1000N) 1N (≥1000N) 0.1Lbf (<1000Lbf) 1Lbf (≥1000Lbf) |
| SPT-104-5T | ±5000kgf ±49000N ±11000Lbf | 0.01kgf (<100kgf) 0.1kgf (≥100kgf) 0.1N (<1000N) 1N (≥1000N) 0.1Lbf (<1000Lbf) 1Lbf (≥1000Lbf) |
| SPT-104-10T | ±10000kgf ±98000N ±22000Lbf | 0.01kgf (<100kgf) 0.1kgf (≥100kgf) 0.1N (<1000N) 1N (≥1000N) 0.1Lbf (<1000Lbf) 1Lbf (≥1000Lbf) |
| Other parameters | ||
| accuracy | Level 0.5 | |
| precision | ±0.5% FS (range) ±1 digital peak | |
| unit | kgf, N, Lbf | |
| Measurable values | Peak, instantaneous value | |
| display | Four-digit large LCD, front and reverse dual displays | |
| Shutdown mode | 10 minutes automatic power off or manual power off | |
| Backlight | Blue backlight | |
| Allowable load | 150%F.s (When exceeding 110%F.s, there is a beep alarm) | |
| power supply | 2 x No. 5 batteries or 5V DC power supply | |
| Operating temperature | 0℃~40℃ | |
| Operating humidity | < 80% | |
| Operating Environment | There is no seismic source and corrosive medium around | |
| Net weight | 1165g | |
| Dimensions of the main unit | 175mmx80mmx36mm | |
| Sensor size | 140mmx65mmx105mm | |
FAQ
QIf you want to measure the cable tension of the wind power tower, which side tension meter should you choose?
A
SPT-104-10T is recommended. Wind tower cables usually withstand large tensile forces. This 10-ton range can cover most working conditions, and the peak hold function can also record the maximum tension value, which is suitable for on-site inspection.
QWhat range of equipment is suitable for testing power tower wires?
A
According to the characteristics of the power transmission system, it is recommended to choose the SPT-104-5T or 10T model. The tension of the tower cable is generally several tons to more than ten tons. Both of these can be accurately measured and have an overload alarm function, which can effectively protect the equipment.
QI want to measure the cable tension of the wind power tower, which model should I choose?
A
SPT-104-10T Yes. Because the cable tension of wind power towers is usually large, this one can measure up to 10 tons of tension, which fully meets the needs, and it is specially designed for wind towers, easy to carry and suitable for on-site use.
QWhat should be paid attention to when measuring the cable of a power transmission tower?
A
Power transmission tower cables require tension measurement to ensure safety. SPT-104-5T or 10T are recommended, they have 0.5 level accuracy and peak hold function, which can accurately record the maximum tension value and avoid reading errors.
QWhat are the practical functions of this instrument?
A
It supports automatic conversion of multiple units of newton, kilogram, and pound, as well as front and back dual displays and blue backlight, making it especially convenient for reading when working at high altitudes outdoors. The peak hold function allows you to avoid missing any maximum tension value.