AMITTARI LTMS-10K Wire Tensifier, Yarns, Fibers, Wires and Fibers
SE
LTMS-10K
AMITTARI LTMS-10K Wire tensiometerSPEC
AMITTARI LTMS-10K Wire tensiometerDetails
AMITTARI LTMS-10K Wire tensiometerPacking list
- SKU
- NB047772
- Measurement range
- 0~10.0kgf 0~98N 0~22Lbf
- resolution
- 0.01kgf 0.1N 0.1Lbf
- Precision
- +/- 1.5% or better
- Wheel spacing
- 105mm
- unit
- kgf, gf, N, Lbf
- Measurement principle
- strain gauge
- Measurement frequency
- 16 milliseconds (62.5 sampling/s)
- Sensing Wheel Offset (MAX Maximum)
- 0.2mm
- overload Capacity
- 150% of full scale
- temperature coefficient
- Zero point: less than +/- 0.3% FS/℃ Within range: less than +/- 0.01% FS/℃
- display update rate
- 0.5, 1.0, 2.0 or 4.0 second display conversion optional
- Measured value
- Current Value, MAX Maximum, Peak, MIN Minimum
- Roller material
- Stainless steel (standard)
- Maximum speed
- 2000m/min
- operating conditions
- Temperature: 0 ℃~ 40 ℃ (32 ° F~ 104 ° F)
- Power Supply
- 4X1.5v AAA AA batteries
- size
- Host: 140mm * 70mm * 31mm
- Weight
- 400G (without battery)
The LTMS Digital Tensiometer is a handheld device used to accurately measure the tension of various process materials (including yarns, fibers, wires, and optical fibers) in operation or at rest.
Features
It uses the "three-wheel tension measurement principle".
High precision and high resolution. Digital display, no parallax.
N (Newton), kg (kg), lb (pound), g (gram) four units of measurement are available and converted to each other.
The current, maximum, peak, and minimum values that occur during the measurement interval are also displayed.
It can be set to automatically shut down for 10 minutes without operation; It is also possible to shut down by hand.
62 measurements are taken per second and the average of the measurements is displayed according to the user-selected time intervals.
It uses USB data cable output to communicate with PC.
Bluetooth and Bluetooth data output options are available