The instrument is designed and developed according to the standard requirements implemented by the Ministry of Chemical Industry in 1980, which is widely used in the coating industry. Standard number: GB1748-79 "88"
The instrument is mainly composed of two parts, the press frame and the demould, when using, the hold-down roller handle and the press frame are placed at the rear end of the supporting form, so that the supporting film is completely exposed, then the sample is inserted into the small groove of the rear end of the supporting film, and one end of the sample is pressed by the eccentric shaft with the compression handle, then the pressing frame is moved down, the rolling shaft on the pressing frame makes the template bend and deform uniformly along the surface of the supporting film, the pressing frame is moved to the positioning Xiao place, and finally the physical change of the surface of the putty film of the template is observed.
There are two types of supporting film specifications: R25 R50
When the instrument is not in use, please wipe off the dirt on the surface, lubricate the rotating part with 40# engine oil, and store it in a ventilated and dry environment.
1. Press frame 2. Supporting film (R25; R50 two) 3. Compress the roller handle4, eccentric shaft 5, rolling mandrel shaft 6, positioning Xiao