Pilot-scale coil automatic film laminating machine, with unwinding + scraping + drying + film laminating + deviation correction + winding function application width 750mm
SE
Rxg-01/750
Factory Rxg-01/750 Automatic Film ApplicatorSPEC
Factory Rxg-01/750 Automatic Film ApplicatorDetails
Factory Rxg-01/750 Automatic Film ApplicatorPacking list
- SKU
- NB048582
- Coating method
- scraping
- Coating speed
- 1~10m/min
- application width
- 100-750Mm adjustable
- WFT
- 0.005-3mm
- Device size
- Subject to actual customization
- maximum discharge
- 800mm
- Maximum charge
- 800mm
- Effective application width
- 750mm
- Drying Temperature range
- Room temperature -200 ℃
- Drying channel length
- 1m
- Drying Power
- 5KW
- Power/Power
- 220V/2.5KW
- Spreader head
- Spreader for adjustable drawdown blade
- Coating size
- Max.750mm
- Rewinding and unwinding device
- √
- Automatic tension
- √
- correction system
- √
- laminating device
- √
Introduction
The pilot roll automatic laminating machine is suitable for water-based adhesive coating of paper, film, aluminum foil, plastic, non-woven fabric and other non-elastic materials. With the functions of unwinding, scraping, drying, laminating, rectifying and winding, it is an automatic coating machine for oven coils.
Product Structure
The machine is composed of a body, a gluing width adjustment device, a discharging rack, a gluing roller group, a thickness adjustment dial gauge, a transmission platform, a traction roller group, and a transmission mechanism.
1. Body: The body of the equipment is composed of aluminum alloy + high static spraying plate.
2. Gluing width adjustment device: The width adjustment device is composed of food-grade plastic and movable brace.
3. Discharging rack: The machine is equipped with two discharging racks, when the two materials are misaligned and deviated in the laminating process, the deviation correction device automatically adjusts the material rack to move left and right to achieve the effect of aligning the two materials.
4. Rubberized roller set: The rubberized roller group is made of double-drum precision machined parts, and the transmission is stable.
6. Thickness adjustment dial gauge: the adjustment of the coating thickness required when gluing. The thickness of the gluing can be adjusted by rotating the left and right handwheels on the gluing roller frame clockwise or counterclockwise, and the specific thickness is determined according to the dial gauge indication.
7. Transmission platform: The transmission platform is made of stainless steel, and its main function is to connect the substrate after gluing to the next process.
8. Traction roller group: the substrate is pulled by hand between the upper and lower rollers of the traction roller, the handwheel on the frame is tightened to make the traction roller, the rubber ring of the upper roller is in contact with the lower roller, and the traction roller group pulls the substrate over through power transmission to complete the coating work。
- 1Overview and comparative analysis of roll-to-roll coater and double-sided coater technology
- 2Overview and skills of laboratory roll-to-roll coater technology
- 3Application and technical advantage of roll-to-roll coater in preparation of hot-melt adhesive plaster
- 4Deep analysis of tension control principle of coater coil
- 5Overview of Roll-to-Roll Film Applicator Technology
- 6Research and application of roll-to-roll coater selection technology
- 7Automatic Film Applicator technology analysis
- 8Discuss the key technologies of small roll-to-roll coater: Spreader head, roller, drive and drying
- 9Comparative Analysis of Small Spreader and Traditional Roll-to-Roll Coater
- 10Technical Principle, Application and Selection of PT Film Roll-to-Roll Film Applicator