PUSHEN DCJ-II DuPont Impact, plastic, ceramic, acrylic fiberglass
SEHeavy hammer drop height 50~500mm, equipped with 300 grams, 500 grams, 1000 grams of three weight heavy hammer, instrument size 390 * 250 * 840mm
$817.00/set
PromotionLoading...
Coupon
Model：
DCJ-II
Pushen DCJ-II DuPont Impact DeviceSPEC
Pushen DCJ-II DuPont Impact DeviceDetails
Pushen DCJ-II DuPont Impact DevicePacking list
- SKU
- NB048974
- Hammer drop height
- 50~500Mm (every 50mm is a grade, which can be adjusted freely)
- Heavy Weight
- 300 grams, 500 grams, 1000 grams each
- Punch radius
- 1/2 ", 1/4", 1/8 ", 1/16", 3/16 "There are five kinds in total
- die base radius
- 1/2 ", 1/4", 1/8 ", 1/16", 3/16 "There are five kinds in total
- instrument size
- 390*250*840mm
- instrument Weight
- 35 KG
DCJ-II
DuPont Impact Device
Heavy hammer drop height 50~500mm, equipped with 300 grams, 500 grams, 1000 grams of three weight heavy hammer, instrument size 390 * 250 * 840mm
Introduction
The DCJ-II DuPont impactor (PS 2699) is suitable for plastics, ceramics, acrylic, glass fibers and other materials and test coatingsDegree of Tightness. The principle is to adjust the steel ball of the specified weight at a certain height to make it fall freely, hit the sample, and observe its acceptanceDegree of damage.
Meets standards
Taiwan Standard CNS 10756
Japanese Industrial Standard JIS-K5400 "General Test Method for Coatings"
American Materials Standard ASTM-D2794 "Standard Test Method for Resistance of Organic Coatings to Rapid Deformation (Impact)"
FAQ
QI want to test the Impact performance of Coatings, which instrument should I choose?
A
Recommended PUSHEN DCJ-II DuPont Impact, specially used to evaluate the impact resistance of Coating coatings, in line with ASTM-D2794 and other standards, through the free fall of the steel ball Impact sample, can accurately test the durability of Coatings.
QWhat materials can this Impact be used on?
A
DCJ-II is suitable for plastics, ceramics, acrylic, fiberglass and many other materials. It is suitable for the Coatings industry because it can simulate the rapid deformation Impact and help to test the durability and damage resistance performance of the surface coatings of materials.
QWhat materials can this Impact measure?
A
DCJ-II is suitable for a variety of materials such as plastics, ceramics, acrylic, fiberglass, etc., especially for Coating fastness testing. By adjusting the weight and height of the steel ball, it can meet the needs of anti-Impact assessment of different materials.