Factory Direct Rgdc- 01.2/400 immersion coil coater application width 400mm
SE
Rgdc-01.2/400
Factory Rgdc-01.2/400 Soaking coil coaterSPEC
Factory Rgdc-01.2/400 Soaking coil coaterDetails
Factory Rgdc-01.2/400 Soaking coil coaterPacking list
- SKU
- NB049631
- Spreader process
- Rolling → soaking → scraping → drying → film laminating → winding
- Coating method
- soaking + scraping
- Coating speed
- 0.1~ 300mm/min (adjustable)
- Coating size
- ≤400mm
- Width of guide roller
- 400mm
- scraping thickness
- 0.001-3Mm (adjustable)
- Film Accuracy
- ±5%
- Graduation
- 0.001mm
- percentile
- digital display
- Spreader thickness control
- manual
- Bath size
- 1000 * 400 * 500Mm (length * width * height)
- Dip coating type
- Solution soaking (Note: After the substrate is crystallized in solution, it can be rolled around the tape)
- Dip coating material
- Resistant corrosion stainless steel (note, the solution cannot react chemically with the material)
- Number of baths
- 1
- Drying tunnel size
- 1200Mm * 400 * 500 (length * width * height)
- Drying tunnel temperature
- Room temperature~ 200 ℃ adjustable
- Heating mode
- hot air circulation
- Oven length
- 1.2M/section
- Total length of drying tunnel
- 1.2m
- Drying Power
- 1KW/section
- Fitting method
- Roll fit
- Fitting speed
- 0.1~ 300mm/min (adjustable)
- fit width
- Max.Φ400mm
- Motor type
- Servo motor
- Control mode
- PLC + touch screen
- Human Machine Interface
- Color touch screen
- unwinding method
- Inflatable shaft unwinding
- winding method
- Inflatable shaft winding
- Outer diameter of winding air expansion shaft
- 3-Inch expansion shaft, load-bearing 50KG
- Unwinding outer diameter
- Max. Ф400mm
- winding outer diameter
- Max. Ф400mm
- Tension Control mode
- automatic
- Control mode
- automatic
- tension control
- Automatic constant tension (1-10N)
- Correction Accuracy
- ±1mm
- Applicable coil type
- Plastic film, paper, non-woven fabric, etc
- Spreader type
- Water-based paints, solar-based paints, UV coatings, etc
- Dimension
- 5000Mm * 600mm * 1600mm (subject to actual customization)
- Weight
- 0.5T (subject to actual customization)
- Power Supply
- Single Phase AC220V +/- 10%, Frequency 50Hz, Power 9.5KW
- gas source
- 0.5~ 0.8MPa compressed air
Introduction
RGDC-01.2/400 immersion coil coating machine is a continuous experimental film coating machine with unwinding, scraping, dipping and winding functions, with a coating film width of 400mm and a wet film thickness of 0.005-3mm.
Product Structure
The machine is composed of a body, a gluing width adjustment device, a discharging rack, a gluing roller group, a thickness adjustment dial gauge, a transmission platform, a traction roller group, and a transmission mechanism.
1. Body: The body of the equipment is composed of aluminum alloy + high static spraying plate.
2. Gluing width adjustment device: The width adjustment device is composed of food-grade plastic and movable brace.
3. Discharging rack: The machine is equipped with two discharging racks, when the two materials are misaligned and deviated in the laminating process, the deviation correction device automatically adjusts the material rack to move left and right to achieve the effect of aligning the two materials.
4. Rubberized roller set: The rubberized roller group is made of double-drum precision machined parts, and the transmission is stable.
6. Thickness adjustment dial gauge: the adjustment of the coating thickness required when gluing. The thickness of the gluing can be adjusted by rotating the left and right handwheels on the gluing roller frame clockwise or counterclockwise, and the specific thickness is determined according to the dial gauge indication.
7. Transmission platform: The transmission platform is made of stainless steel, and its main function is to connect the substrate after gluing to the next process.
8. Traction roller group: the substrate is pulled by hand between the upper and lower rollers of the traction roller, the handwheel on the frame is tightened to make the traction roller, the rubber ring of the upper roller is in contact with the lower roller, and the traction roller group pulls the substrate over through power transmission to complete the coating work.
Features
Substrate tension control, stable belt handling;
The main drive is servo driven, and the speed can be set;
PLC control, HMI operation, convenient and easy to use;
Process Introduction
The equipment adjusts the unwinding tension by controlling the unwinding shaft torque, and adjusts the winding tension by controlling the winding shaft torque, which is based on the linear speed of the rotation of the main drive steel roller
The main drive speed enables transport control.