China

DZ3500S carbon black content Tester, high temperature pyrolysis carbon black content Tester

SE
Using high temperature pyrolysis technology, accurate temperature control (room temperature~ 1150 ° C), 7-inch touch screen one-button operation, support multi-stage program heating and automatic calculation results. Integrated design with rapid cooling (≤ 20 minutes) and exhaust gas filtrate function, 4 samples can be measured at a time.
Model：
Certificate
Contact
Details SPEC Con

DaZhan equipment DZ3500S Carbon black content TesterSPEC

DaZhan equipment DZ3500S Carbon black content TesterDetails

DaZhan equipment DZ3500S Carbon black content TesterPacking list

SKU
NB049704
display mode
7 inch capacitive touch screen
Quartz tube size
φ44×600±5mm
Furnace size
Φ45×300±5mm
heating element
superalloy wire
Heating zone length
250mm
operating temperature
Room temperature~ 1150 ℃
Temperature control method
Intelligent programmable control, segmentation program can be set.
Power Supply
AC220V/50HZ/60HZ
sensor sensitivity
0.1℃
Pneumatic control
Two-way, the program automatically switches
cooling method
Rapid cooling (≤ 20min, 900 ° C to room temperature)
Number of test samples
Test 4 samples at a time
data computing
The software comes with its own calculation function, one-click calculation; it can automatically calculate the carbon black content and ash content.
Miscellaneous
Customized guide rail type sample holder, easy to take and loft, open cover type, fast cooling, with exhaust gas filtrating device, with printing function
DZ3500S
Carbon black content Tester
Using high temperature pyrolysis technology, accurate temperature control (room temperature~ 1150 ° C), 7-inch touch screen one-button operation, support multi-stage program heating and automatic calculation results. Integrated design with rapid cooling (≤ 20 minutes) and exhaust gas filtrate function, 4 samples can be measured at a time.
DZ3500S carbon black content Tester, high temperature pyrolysis carbon black content Tester Picture

Instrument Introduction

The carbon black content Tester is suitable for the determination of carbon black content in polyethylene, polypropylene, polybutylene plastics, cable and fiber optic cable insulation and sheath materials, and rubber. Comply with national standards GBT 3515-2005, GBT 13021-1991, GB/T2951.41-2008, IEC60811-4-1:2004, etc. A certain amount of sample is pyrolyzed at high temperature in a nitrogen gas stream, and the carbon black content is obtained by analyzing the weight of the sample after pyrolysis.

Technical features:

1. The instrument has beautiful appearance and structure, and is simple to operate;

2. The integrated design of the heating furnace body and the control system is convenient for the user's instrument management.

3. High degree of automation, only need to set the temperature value and heating time, and the instrument will automatically heat up to the set value;

4. High temperature control accuracy, wide temperature range, high furnace temperature uniformity;

5.7-inch LCD touch screen display, extremely friendly operation interface, can be started with one key operation

6. It has excellent thermostatic function, and can set the thermostatic time, and the thermostatic accuracy is high;

7. The instrument can set any group of different heating time periods, and can have different heating temperatures, heating rates, and constant temperature times;

8. The parameter display is comprehensive, showing the number of setting groups, theoretical temperature, actual temperature, heating time (or constant temperature time);

9. During the operation of the instrument, you can check the set parameters and the time of heating up or constant temperature.


FAQ
QWhat instrument should be used to measure the carbon black content in polyethylene (PE) materials?
A DZ3500S carbon black content tester can be used for the determination of carbon black content in polyethylene (PE), polypropylene (PP) and other plastics, in line with the national standard GBT 3515-2005 and other standards. The instrument automatically calculates the carbon black content through high temperature pyrolysis samples, and the operation is simple.
QCable sheath material needs to measure the carbon black content, which equipment to choose?
A This instrument is suitable for cable and optical cable insulation sheath materials and meets GB/T 2951.41 - 2008 standards. The instrument has high temperature control accuracy, Temperature range up to 1150 ℃, can accurately pyrolyze samples, automatically calculate carbon black and ash content, and ensure reliable test results.
QI need a carbon black tester that can measure multiple samples and has accurate temperature control. Do you have any recommendations?
A DZ3500S carbon black content meter can test 4 samples at a time, with high temperature control accuracy, Temperature uniformity is good, and supports programmable segmented heating. The 7-inch touch screen is easy to operate, with automatic calculation and printing functions, which can meet your needs for multi-Sample Handling and accurate temperature control.
Filter Brand Store Contact