Yonghao vacuum YKA60-2-II chemical and corrosion resistant Vacuum Pump PTFE pump head double stage pump
SEPTFE pump head material and coating diaphragm design, suitable for strong corrosion gas treatment; two-stage pump structure, pumping speed up to 60L/min, Ultimate Vacuum 3~ 8mbar, with its own pressure relief and cleaning functions.
$2541.00/set
PromotionLoading...
Coupon
Model：
YKA60-2-II
YongHao vacuum YKA60-2-II Chemical corrosion resistant Vacuum PumpSPEC
YongHao vacuum YKA60-2-II Chemical corrosion resistant Vacuum PumpDetails
YongHao vacuum YKA60-2-II Chemical corrosion resistant Vacuum PumpPacking list
- SKU
- NB050197
- pumping speed
- 60(L/min)
- Ultimate Vacuum
- 3~ 8 (no load) (mbar)
- Power supply Voltage
- 220(V/50Hz)
- Input Power
- 400(W)
- Pump head type
- double stage pump
- interface specification
- 10mm
- noise value
- <58dB(A)
- Rotation speed
- 1450(r/min)
- Dimension
- 210*350*210mm
- Weight
- 22kg
YKA60-2-II
Chemical corrosion resistant Vacuum Pump
PTFE pump head material and coating diaphragm design, suitable for strong corrosion gas treatment; two-stage pump structure, pumping speed up to 60L/min, Ultimate Vacuum 3~ 8mbar, with its own pressure relief and cleaning functions.
Technical characteristics:
1. PTFE pump head material and PTFE coated diaphragm, suitable for highly corrosive gases and vapors
2. Equipped with a vacuum gauge to adjust the vacuum pressure.
3. Pressure relief function, self-cleaning function
4. Good air tightness
5. Green environmental protection
Main applications:
Rotational evaporation
vacuum drying
Centrifugal condenser
Vacuum Oven
Gel drying
It can replace the water circulation pump
FAQ
QI want to buy a vacuum pump for swirl/spin evaporation experiments, any recommendations?
A
With a PTFE head and diaphragm, this pump is resistant to highly corrosive gases and is particularly suitable for organic solvents that may come into contact during swirl/spin evaporation. Ultimate vacuum degrees with a pumping speed of 60L/min and 3-8mbar fully meet the stable vacuum requirements of swirl/spin evaporation.
QLaboratories often do vacuum drying and centrifugal condensing, which vacuum pump is better?
A
YKA60-2-II is suitable. Its two-stage pump design provides a stable vacuum, with its own pressure relief and cleaning functions, which is easy to operate. PTFE material is resistant to corrosion, can cope with various chemical environments, and the noise is less than 58dB, which is suitable for quiet work in laboratories.