Vacuum pumps are generally used to remove dry gas from sealed containers, but in actual use, the gas is more or less mixed with water vapor and other organic corrosive harmful gases that affect the service life of Vacuum Pump oil. During the operation of the Vacuum Pump, the negative pressure can easily cause the oil and gas of the Vacuum Pump to return to the vacuum container. The adsorption trap is installed in front of the Vacuum Pump inlet, and the activated alumina ball is used as the adsorption medium, which can adsorb the water vapor and chemically corrosive harmful gases in the pumped gas, and at the same time block the return of the Vacuum Pump oil and gas into the vacuum container, and its oil retention rate can reach more than 99%. Customers can choose according to the actual use of Vacuum Pumps. Activated alumina balls can be revived after heating and removing water, but the amount of this adsorption trap is small, so it is recommended to use alumina balls disposably.
This suction trap is suitable for small rotary vane Vacuum Pumps with a pumping speed of ≤ 6L/s
Activated alumina balls Please use our special activated alumina balls
Activated alumina balls are replaced in time according to actual usage
Configuring a suction trap will slightly affect the pumping speed and vacuum level
304/316 stainless steel housing
Simple structure and easy operation