QIWEI CXC-06 Crude fiber Tester, acid-base digestion method, feed grain detection
SE
CXC-06
QiWei CXC-06 Crude fiber TesterSPEC
QiWei CXC-06 Crude fiber TesterDetails
QiWei CXC-06 Crude fiber TesterPacking list
- SKU
- NB050288
- Power
- 2.5KW
- Measure the number of samples
- 6 pieces/time
- Measurement object
- Various Feeds, Grains, Grains, Foodstuffs and Miscellaneous Agricultural and Sideline Products for Determination of Crude Fiber Content
- Repeatability Error
- Crude fiber content below 10%, absolute value error ≤ 0.4%, crude fiber content above 10%, absolute value error ≤ 4%
- Measurement time
- Required on the instrument for about 100 minutes (including picking for 30 minutes, alkali washing for 30 minutes, preheating, suctionfiltration and washing for about 40 minutes)
- instrument size
- 680×280×650mm
- Encasement box size
- 735×350×900mm
- Power Supply
- AC220V/50HZ
- Gross (approx.)
- 32kg
Product Introduction
CXC-06 crude fiber analyzer is a measuring instrument that boils samples according to the commonly used acid-alkali digestion method and conducts gravimetric measurement to obtain the crude fiber content of the sample. Suitable for all kindsDetermination of crude fiber content in feed, grain, grain, food, etc.
principle
This instrument uses a fixed amount of acid and alkali, digests the sample under specific conditions, and then uses ether and acetone to remove the soluble substances, and deducts the amount of minerals after high-temperature burning, and the remaining amount is called crude fiber. It is not an exact chemical entity, but only a rough composition measured under accepted mandatory conditions, with a predominance of cellulose and a small amount of hemicellulose and lignin.