China

JINGKELIAN QXD 50-150 Stainless Steel Fineness of Ground Gauge 50-150 μm/10 μm

SE
Single-channe, range 50~150μm, scale unit μm, Graduation 10μm, scraper material stainless steel, can be used to determine the particle fineness in Paints, paint paste and inks, in microns.
$133.00/piece
PromotionLoading...
Coupon
Model：
Certificate
Contact
Details SPEC Con VIDEO OI
Similar products

JingKeLian QXD 50-150 Fineness of Ground GaugeSPEC

JingKeLian QXD 50-150 Fineness of Ground GaugeDetails

JingKeLian QXD 50-150 Fineness of Ground GaugePacking list

SKU
NB005036
Scraper type
Single-channe
Number of grooves
1
range
50 ~ 150μ m
Scale unit
mm
Graduation
10µm
Scraper material
stainless steel
Scraper size
155*50*12mm
Groove size
13*120mm
Scraper material
stainless steel
Scraper size
68×40×6.5mm
Applicable standard
GB1724-79
Surface finish on scraper
10
Chute bottom surface finish
8
Scraper two edge finish
8
Scraper two knife edge plane flatness
0.002mm
Flat flatness on scraper
0.003mm
Bottom plane flatness of chute
0.003mm
QXD 50-150
Fineness of Ground Gauge
Single-channe, range 50~150μm, scale unit μm, Graduation 10μm, scraper material stainless steel, can be used to determine the particle fineness in Paints, paint paste and inks, in microns.
JINGKELIAN QXD 50-150 Stainless Steel Fineness of Ground Gauge 50-150 μm/10 μm Picture

Introduction

The Fineness Meter is designed according to the standard paint inspection method promulgated by the Ministry of Chemical Industry: Fineness Meter measurement method GB1724-79, which can be used to test the fineness of pigments, fillers and impurities in paints and paint pastes, expressed in microns .

Uses: Determination of particle fineness of fuel filling and impurities in paints, varnishes and inks


FAQ
QWhat is the scale interval of the QXD Scraper Fineness Meter?
A Hello, the scale interval is 10 microns.
QMeet ASTMD1316 Fineness gauge
A QXD 50-150 (stainless steel) Fineness gauge, please refer to it.
QCan the JINGKELIAN QXD5150 Fineness gauge detect coatings up to 100 microns?
A In line with the scraper fineness Measurement can scrape the sample fineness below 50-150 μ m.
Standard
Filter Brand Store Contact