ZIBO KLS-10 Cartesian furnace vaporization unit, solid sample water evaporation instrument
Using aluminum block heater, heating accuracy of 0.2 ℃, support sample mass less than 10g or volume less than 2.5ml, rapid heating to set temperature, suitable for water vaporization analysis of various solid samples.
Model：
KLS-10
zibo KLS-10 Cartesian furnace vaporization deviceSPEC
zibo KLS-10 Cartesian furnace vaporization deviceDetails
zibo KLS-10 Cartesian furnace vaporization devicePacking list
- SKU
- NB050678
- Heating range
- 70-300℃
- Heating mode
- Aluminum block heater
- Heating accuracy
- 0.2℃
- Control mode
- PID control
- Heating speed
- 120S (from room temperature to 100 ° C)
- Sample mass
- Mass less than 10g or volume less than 2.5ml
- test range
- Sample relative water content ≥ 20ppm
- Developing solvent
- Nitrogen (purity higher than 99.99%, pressure ≤ 120kPa)
- carrier gas flow rate
- Knob adjustable carrier gas flow rate 0-200ml/min
- volume
- 300(W)x135(D)x220(H)mm
- weight
- 3.5kg
- Power selection
- AC220V(50/60Hz)
- Working environment
- Temperature: 5-40 ℃ Humidity: 85% or less
KLS-10
Cartesian furnace vaporization device
Using aluminum block heater, heating accuracy of 0.2 ℃, support sample mass less than 10g or volume less than 2.5ml, rapid heating to set temperature, suitable for water vaporization analysis of various solid samples.
Product Introduction
The device evaporates moisture from solid samples (10 g or less and 2.5 m1 or less).
It can be used to take samples from disposable vials for heating vaporization, and is suitable for water vaporization devices for standard weight solid or quasi-solid samples, such as: plastic particles, toner, inorganic salts, battery separators, liquid crystals, coatings, food, etc.
How it works:
The water in the sample is vaporized by the heater, and the water is loaded into the reaction flask to participate in the Karl Fischer reaction with high-purity gas as the carrier gas, so as to obtain the moisture content in the solid.
FAQ
QIs the price listed on the website the final cost for overseas purchases?
ANo, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
QWhat is the specific process for purchasing the product?
AFirst, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
QWhat should I do if the instrument I purchase needs repair?
AAfter-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.