Tianma FA1004XB Electronic Balance 2 seconds stable reading, internal calibrated
SEUsing a new generation of electromagnetic Sensor, high accuracy measurement results, Response speed. Stabilization time only 2 seconds, weighing speed is divided into fast, medium speed, slow speed three adjustable, Sensitivity can also be adjusted, and equipped with RS-232 interface.
$626.00/set
PromotionLoading...
Coupon
Model：
FA1004XB
TianMa FA1004XB 1/10,000 Electronic BalanceSPEC
TianMa FA1004XB 1/10,000 Electronic BalanceDetails
TianMa FA1004XB 1/10,000 Electronic BalancePacking list
- SKU
- NB050847
- Capacity
- 100g
- test weight
- 100g
- Calibration method
- internal calibration
- Read accuracy
- 0.1mg
- weight
- External calibration model External weight calibrated/internal calibration model No external weight
- Stabilization time
- 2 seconds
- Warm-Up Time
- 30-60 minutes
- Minimum Weight
- 0.1mg
- Repeatability
- ±0.1mg
- Linearity
- ±0.2mg
- output interface
- RS232/USB (optional)
- Pan Size
- Ф90mm
- exterior size
- 31x21.2x35cm
- Packaging Dimensions
- 42x36x42cm
- Net weight
- 5500g
- power supply
- AC110V-220V
FA1004XB
1/10,000 Electronic Balance
Using a new generation of electromagnetic Sensor, high accuracy measurement results, Response speed. Stabilization time only 2 seconds, weighing speed is divided into fast, medium speed, slow speed three adjustable, Sensitivity can also be adjusted, and equipped with RS-232 interface.
Product Introduction
The FA/JA series is a new generation of products independently developed by the company. It adopts a high-precision electromagnetic force balance sensor. This results in more accurate measurements, faster response times, and fewer failures.
Product features:
Stable reading in 2 seconds, greatly improving weighing efficiency
A new generation of electromagnetic sensors are used
High-definition and large LCD display
The measurement speed and sensitivity are adjustable
The weighing speed is divided into fast, medium and slow speed adjustable
It can be peeled, cleared, overloaded, underloaded and displayed in the whole range, and fault alarm
Equipped with RS-232 interface, it can be connected to external devices such as printers and computers
Fault detection function
It is suitable for a wide range of environments and fields
FAQ
QI want to buy a Balance to weigh drugs with high accuracy and speed. Do you recommend it?
A
Recommended Tianma FA1004XB 1/10,000 Electronic Balance. It uses High Accuracy electromagnetic force equilibrate Sensor, reading accuracy of 0.1mg, suitable for accurate weighing of drugs. And it can stabilize the reading in 2 seconds, which can greatly improve your weighing efficiency. Measurement speed can also be adjusted between fast, medium and slow speed according to your needs, flexible.
QI think this Balance has internal calibration and external calibration models. How should I choose the function?
A
This mainly depends on your requirements for the convenience of calibrating. Tianma FA1004XB is an internal calibration model. It has a built-in test weight. You only need to press a button to automatically complete the calibrate. It is very convenient and fast. It is suitable for occasions where frequent daily use and efficiency are pursued. If you have an external standard weight with higher accuracy, or the laboratory has strict periodic external calibrate regulations, you can also pay attention to the model that requires external calibration, but for daily use, the internal calibration FA1004XB is more worry-free to operate.
QOur laboratory needs a Balance for chemical analysis and sample preparation. It is required to be stable and reliable. It can be connected to a computer to record data. Which one is suitable?
A
The Tianma FA1004XB is suitable for chemical analysis and sample prepative scenarios. It has good Stability and repeatability error of only +/- 0.1mg, which ensures the accuracy of experimental data. What's more, it comes standard with an RS-232 interface, which can easily connect a computer to transmit and record weighing data, meeting your data recording needs.
QI want to choose a fully functional Electronic Balance. In addition to basic weighing, it is best to have trouble prompts and simple operation. Is there any recommendation?
A
Recommend Tianma FA1004XB. This Balance has comprehensive functions, it has fault detection and alarm functions, such as overload and underload will display prompts, which is more secure to use. In operation, it has a large screen display, supports full range peeling and clearing, and Measurement speed and Sensitivity can be adjusted, simple to use, can meet your requirements for multi-function and easy operation.