TQC VF2161 Prismatic bird type Coating Applicator Bird Film Applicator
SE
VF2161
-
MODERNER Frame 50/100/150/200 Large Frame Applicator Stainless Steel Wet Film Applicator 90mm -
MODERNER Frame 50/100/150/200 Large Frame Applicator Groove Width 60mm -
MODERNER Combo - 50/100/150/200 Quadrilateral Preparation 78x100 -
TQC VF1502 Baker Coating Applicator width 80mm 50/100/150/200µm$ 909.00SE -
TQC VF2175 4-sided Coating Applicator 50/100/150/200µm$ 1058.00SE
TQC sheen VF2161 Prismatic bird type Coating ApplicatorSPEC
TQC sheen VF2161 Prismatic bird type Coating ApplicatorDetails
TQC sheen VF2161 Prismatic bird type Coating ApplicatorPacking list
- SKU
- NB000520
- type
- multi-faceted
- WFT
- 50/100/150/200μm
- Application width
- 50mm
- Accuracy
- ±3μm
- material
- High grade stainless steel
- standard
- ASTM D 3022 ASTM D 823
Introduction
TQC prismatic bird-shaped applicators are available in three models: VF2161, VF2162, and VF2163. The bird-shaped applicator has a gap and is easy to clean. The bird-shaped paint applicator is made of stainless steel and is not affected by the acidity in paint or cleaning agents. It is resistant to erosion by substances or alkaline substances and is very durable.
In terms of painting, the 4 painting surfaces of the bird-shaped paint applicator (Wet Film Applicator) can be applied to 4 different paint film thicknesses on cloth. It is simple and effective to use, and models are distinguished according to different coating widths.
The bird-type Film Applicator has a coating width of 50mm (2 inches), 75mm (3 inches), and 100mm (4 inches), and is suitable for most products and corresponding solid substrates.
Specifications
| model | Coating film thickness (μm) | Coating width (mm) | Material | standard |
| VF2161 | 50/100/150/200 | 50 | Stainless steel | ASTM D 3022 ASTM D 823 |
| VF2162 | 75 | |||
| VF2163 | 100 |
Product details
Take you into the Dutch TQC
- 1GB/T 1727-2021《General methods for preparation of coating films》
- 2GB/T 7044-2022《Colour carbon black》
- 3HG/T 20720-2020《Construction and acceptance specification of waterborne anti-corrosion coatings for steel structures in industrial buildings》
- 4HG/T 3951-2007《Water based colorants for architectural coatings》
- 5GB/T 13217.1-2020《Test method for colour and tinctorial strength of ink》
- 6GB/T 9755-2014《Synthetic resin emulsion coatings for exterior wall》
- 7HG/T 23002-2002《Chemical enterprise safety department (section) working standards》
- 8ASTM D823-2018《Paints, varnishes and related products of uniform thickness on the test board》
- 9JB/T 7663.2-2007《Technical conditions for positive displacement compressor painting》
- 10GB 1727-1992《Paint film general preparatory method》