Specifications
| Flow Rate | 5L/h |
| Flow velocity | 1.0~2.0 L/min |
| Ultrapurification Unit Capacity | 8000L |
| Pure water quality | Conductivity * ≤ 5μs/cm@25 ℃, in line with the Chinese laboratory water specification GB/T6682-2008 tertiary water standard |
| Ultrapure water quality | Electrical resistivity: 18.2MΩ .cm@25 ℃; particles (> 0.2um) < 1/ml |
| Inlet source | Municipal tap water, raw water conductivity: < 2000μs/cm, total hardness < 450ppm, PH: 6.5-8, free chlorine < 1ppm |
| inlet pressure | 1-5Kg, water temperature 5-35 ℃ |
| Operating Environment | Temperature 5~ 40 ℃, avoid direct sunlight |
| Power | 100-240VAC/50-60Hz, Power: 221W (max) |
| Host size | 550*420*550mm |
| Packing Weight | 51Kg |
| Application | Glass dish cleaning, titrator, particle analyzer, ph value measurement, spectrophotometric luminance method, surface tension test, autoclaving device, biochemical oxygen demand, heating pot, hydroponics, Kedar analysis method. Stability test. Wind erosion Tester, chemical oxygen demand, dissolution test, aquarium and other basic physical and chemical experiment water |
| Interface | USB |
| Application standard | ISO9001:2008 Mass management system, NSF and Water Quality Association standards |
| Produced water quality | tertiary water |
Packing list
host x1, manual x1, certificate x1, warranty contract x1
After-sales instructions
Warranty days: 365 days
[Note] For after-sales services outside the Chinese mainland, if the instrument requires repair, the shipping and possible associated taxes shall be borne by the sender. Generation address of the manual: http://en.nbchao.com/p/5231/Specification.html , which is only used by users who purchase commodities from the NBCHAO.