MODERNER XB-40 Wire bar WFT 40μm

XB-40

Mayer Rods

Introduction to XB-250 wire rod

Modern Environment XB-40 wire rod is a wire-wound stainless steel wire rod with a coating thickness of 40 microns and a coating width of 200mm. MODERNER XB wire rod applicator is suitable for film production in coatings, inks, paints and other industries. The coating scraper is a stainless steel wire-wound coating rod. Steel wires of different diameters are used to control the thickness of the wet film finally prepared in the experiment. It is suitable for measuring the hiding power, gloss, color and preparation of samples. The coating is convenient, the operation is simple, and the coating film is uniform.

Specifications

Note: XB wire rod applicator needs to purchase an additional handle

Instructions

First, place the sample on the platform and fix it to ensure that the sample cannot move when the XB coating scraper passes over it.

Second, select the appropriate XB coating scraper according to the required wet film thickness and place it at the position specified on the sample.

Third, pour an appropriate sample in front of the xb coating scraper, hold the handle (need to be purchased separately) with your hand, and slide it at a constant speed of 150 mm/second, that is, apply a wet film with the required thickness.

Note: The XB coating scraper must be washed and dried with an appropriate solvent immediately after use to prevent the paint from drying out after too long and making it difficult to clean, causing blockage and affecting subsequent experiments.

Packing list：Main Rod X1, External Encasement Pipe X1

[Note]Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.